ERF8-075-05.0-L-DV-L-K-TR

Series:	Edge Rate™ ERF8
Packaging:	Tape & Reel (TR)
Part Status:	Active
Connector Type:	Socket, Center Strip Contacts
Number of Positions:	150
Pitch:	0.031" (0.80mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Board Guide, Latches, Pick and Place
Contact Finish:	Gold
Contact Finish Thickness:	10.0µin (0.25µm)
Mated Stacking Heights:	7mm, 10mm, 13mm, 14mm, 20mm
Height Above Board:	0.210" (5.33mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ERF8-075-05.0-L-DV-L-K-TR are rectangular arrays, edge types, mezzanine connectors (board to board) used in a variety of electronic devices and circuits.A rectangular edge type connector is a type of interconnect that attaches two circuit boards together. The connector utilizes edges rather than pins to make the interconnect. Recessed edge contacts are soldered into a slot on one board and a header is installed over the edge contacts on the other board. This connection is usually designed to support the transmission of digital signals such as those for power, communications, and control.Most rectangular edge connectors are made up of two parts – a female contact and header. The female contact is designed to insert into a slot in a printed wiring board (PWB) and a header is attached to the top or bottom of the female contact. The header includes terminals that can be soldered to the other board, creating an electrical connection between the two. The number of terminals and their arrangement vary, depending on the application.The ERF8-075-05.0-L-DV-L-K-TR is an edge type connector designed to serve as an economical interconnect for board to board applications in a variety of industries. This connector pair consists of an .085” – 05.0” contact array with a 3.75mm centerline and four contacts per signal. It features a two-piece, edge mount design with recessed surface mount contacts on the internal side of the .085” board interface and board edge headers on the external side of the board.The ERF8-075-05.0-L-DV-L-K-TR connector has a 2.00mm solder tail terminations and a dual-beam contact design. The 2.00mm solder tail prevents the risks of contact-to-contact shorting during assembly and soldering and the dual-beam contact design increases mechanical strength. The contacts are also plated with tinLead solder for improved contact reliability.The ERF8-075-05.0-L-DV-L-K-TR can be used as an economical interconnect for board to board applications in a variety of industries including medical, military/aerospace, industrial, instrumentation, and telecom. These connectors are rated for 50V/0.75A and are very easy to install and remove, making them an ideal solution for applications that require frequent maintenance or repairs.The working principle of the ERF8-075-05.0-L-DV-L-K-TR is simple. When two boards are connected, the contacts on the header electrically connect to their counterparts on the contact array, thus forming an electrical connection between the two boards. The contacts are held in place by the two part connector housing, which provides protection from environmental conditions. The design of the connector also allows for EMI and ESD protection, reducing the risk of any electrical interference that could impact the performance of the application.In summary, the ERF8-075-05.0-L-DV-L-K-TR is a rectangular array edge type mezzanine connector specifically designed to serve as an economical interconnect for board to board applications in a variety of industries. It features dual beam contacts and tinLead plating, allowing for improved contact reliability and protection from EMI and ESD. Additionally, it is very easy to install and remove, making it an ideal solution for applications that require frequent maintenance or repairs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description