ERM15A72

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are extensively used in various industries for carrying out a variety of tasks such as changing the input voltage of an electronic device, increasing the output current from a battery, and many more. The ERM15A72, DC to DC converter designed by the Extreme Electronics Company, is an efficient and reliable solution for many applications.

The ERM15A72 is a high-efficiency, low-noise, miniaturized DC to DC converter designed for a wide range of applications. It features a low input voltage range of 2.5 – 15V, with an output power of up to 15 watts. It offers high efficiency up to 94%, low input voltage operation, and short-circuit protection. The operating frequency of this DC to DC converter is 300kHz, and it has a wide operating temperature range of -45 to 85℃. This makes it an ideal candidate for a number of industrial, automotive, medical, aviation, and many other applications.

The working principle of ERM15A72 DC to DC converter is based on the concepts of buck-boost converter. A buck-boost converter is an electrical circuit with DC input and output, which increases or decreases the output voltage as per the requirement. In buck-boost converters, the output voltage can be either higher or lower than the input voltage depending upon the ratio between the input and output voltage. It works on the principles of two power stages, namely the buck and the boost.

The “Buck” stage works when the output voltage is lower than the input voltage. In this stage, the switch S1 is closed and power is drawn from the input side and fed to the inductor coil. Upon switching, the current stored in the inductor rises and forms a peak, which then further flows through the diode D1 to the output capacitor. When this electron surge stops due to the capacitance of the capacitor, the switch S1 closes and the cycle starts again.

The “Boost” stage works when the output voltage is higher than the input voltage. In this stage, the switch S2 is closed and power is drawn from the input side and fed to the inductor coil. This time, the current stored in the inductor flows through the diode D2 to the output capacitor. When the electron surge stops due to the capacitance of the capacitor, the switch S2 closes and the cycle starts all over again.

The ERM15A72 DC to DC converter is widely used in various industries for its potent capabilities and efficiency. Its ability to increase or decrease the output voltage as required makes it a reliable choice for powering complex systems with different input and output voltages. The compact size, high efficiency, and low noise operation of this converter make it a great solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference