ESE-18LJ02 Switches |
|
Allicdata Part #: | P11154STR-ND |
Manufacturer Part#: |
ESE-18LJ02 |
Price: | $ 0.20 |
Product Category: | Switches |
Manufacturer: | Panasonic Electronic Components |
Short Description: | SWITCH DETECTOR SPST-NO 10MA 5V |
More Detail: | N/A |
DataSheet: | ESE-18LJ02 Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.17472 |
Ingress Protection: | -- |
Mechanical Life: | 50,000 Cycles |
Electrical Life: | 50,000 Cycles |
Operating Position: | 0.102" (2.6mm) |
Operating Temperature: | -10°C ~ 60°C |
Overtravel: | -- |
Differential Travel: | -- |
Pretravel: | -- |
Release Force: | -- |
Operating Force: | 30gf |
Features: | Board Guide |
Series: | ESE18 |
Termination Style: | SMD (SMT) Tab |
Mounting Type: | Surface Mount, Right Angle |
Actuator Type: | Angled Toggle (Detector) |
Voltage Rating - DC: | 5V |
Current Rating: | 10mA (DC) |
Switch Function: | Off-Mom |
Circuit: | SPST-NO |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap action, limit switches, such as the ESE-18LJ02, operate on the same principle as a standard toggle switch. When a force is applied to the switch, a mechanical lever arm actuates a lever. This lever leaves contacts open while the arm is pulled up and closes the contacts when the arm is pushed down. This type of switch is very versatile; it can be used to count objects moving on a conveyor, as a position indicator for a reversing motor, as a timing counter for an operation or process, and to control relay contacts. The number of applications for this type of switch is almost limitless.
The ESE-18LJ02 snap action, limit switch is designed to detect a position and provide feedback to a system. The switch has two contacts, one normally open and one normally closed. The flow of current is controlled by the simple activation of a metal lever. When the load is fully activated, the contact opens and applies pressure to the metal lever, closing the contacts and energizing the circuit. When the load is relieved, the contacts are opened and the circuit is de-energized.
The operation of the switch is dependent on the force and direction of the application. The switch is designed to respond to up to 100 grams of force and can be operated in any direction. The response time is high, at 10ms, and the switch is rated for up to 1 million cycles. It is also resistant to most forms of electromagnetic interference, protecting the switch from damage.
The ESE-18LJ02 snap action, limit switch is designed to be a cost-effective, reliable and versatile solution for a wide range of applications. It can be used as an input or output device for counting objects moving on a conveyor, for indicating the position of a reversing motor, for timing and counter applications, and for controlling a wide variety of relay contacts. It has a long-life span, high response time and resistance to electromagnetic interference, making it ideal for many applications.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V