ESP002

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Evaluation and Development Kits, Boards are common solutions to evaluating and developing circuits which utilize radio frequencies. This article will discuss the application field and working principles of ESP002, a RF evaluation and development kit produced by ESP.

ESP002 includes a breadboard, 240 jumpers, Arduino compatible ESP32 kit with ESP32-WROOM-32, ESP32 antenna, and some LEDs that allow users to quickly construct the different projects they want. ESP002 also includes a Programmer/Debugger, ESP32-WROOM-32 Adapter Board, USB Cable, Lithium Battery Connector, and a power cable.

The ESP32 antenna is a small chip-like piece that transmits and receives radio frequency signals. It receives these signals in the 900 MHz and 2.4 Ghz bands, which makes it suitable for both short-range and long-range projects. The breadboard on ESP002 is a board where user can easily mount the components. It also includes four LEDs which allows the user to control the output power.

The ESP32-WROOM-32 is considered the heart of the ESP002 kit. It has a 32-bit dual-core processor, two Wi-Fi transceivers, and Bluetooth Low Energy/Bluetooth Smart. ESP32-WROOM-32 supports several communication modes such as Wi-Fi STA/WPA/FTPS/FTPC, BLE, and UART/I2C/I2S. The ESP32-WROOM-32 also supports several types of encryptions like WPA2 PSK, WPA2-Personal, and WPA2-Enterprise.

The Programmer/Debugger is used to program the ESP32-WROOM-32 and monitor its status while running. This board comes pre-installed with the Arduino IDE, which allows for fast programming and debugging. It also includes a pair of GPIO headers (GPIO 0 and 1) for external electro-mechanical devices.

The ESP32 board also includes the ESP32-WROOM-32 Adapter Board. This board acts as a bridge between the ESP32-WROOM-32 and the power source. The ESP32-WROOM-32 Adapter Board included on the ESP002 kit, provides users with access to two diode protected 3.3V and 5V power outputs as well as one separate 3.3V/5V Debug/Programming channel.

To use the ESP002 kit for electronic projects, the user needs to do the following steps. First, connect the ESP32-WROOM-32 to the programmable board. Second, use the USB Cable to connect the board to the PC. Third, power the ESP32-WROOM-32 using the included lithium battery. Fourth, use the Arduino IDE to upload the program to the ESP32-WROOM-32. Finally, power the programmable board using the USB Cable.

ESP002 is an ideal tool for quick prototyping and developing projects that need to be tested on radio frequencies. It comes pre-installed with Arduino IDE, so programming and debugging are easy to do. It also includes various supporting components that aid in the development process. Its range of operations and communications modes make it an ideal tool for many projects.

The specific data is subject to PDF, and the above content is for reference