ESR01MZPJ100 Resistors

Series:	ESR
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 Ohms
Tolerance:	±5%
Power (Watts):	0.2W, 1/5W
Composition:	Thick Film
Features:	Automotive AEC-Q200, Pulse Withstanding
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	0402 (1005 Metric)
Supplier Device Package:	0402
Size / Dimension:	0.039" L x 0.020" W (1.00mm x 0.50mm)
Height - Seated (Max):	0.016" (0.40mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ESR01MZPJ100 Chip Resistor - Surface Mount

The ESR01MZPJ100 is a chip resistor whose function is to provide electrical load on a circuit and regulate current flow in any given engineering application. In electronic circuits, chip resistors provide a wide variety of performance, reliability, and size requirements. This particular chip resistor is a surface mount type, with a low 0.1 ohms resistance rating. As a surface mount resistor, the ESR01MZPJ100 is designed to mount onto the surface of a printed circuit board.

Application Field

The ESR01MZPJ100 chip resistor is used in both commercial and industrial applications, such as computing, telecommunications, consumer electronics, automotive electronics, and instrumentation equipment. Generally speaking, the chip resistor is mainly seen in applications where low power consumption with reliable and reliable voltage regulation is required. In applications where noise and line loss compensation is needed, the chip resistor is often used in series with other components, such as capacitors and diodes, in order to reduce or eliminate common mode noise. By using a combination of resistors, capacitors, and diodes, engineers are able to make sure that the lines in their system are receiving the cleanest power available. Another area where the chip resistor is in use is in ESD protection. The chip resistor’s low resistance rating helps to dissipate rapid electrical surges, protecting the system from a potential electrostatic discharge.

Working Principle

The ESR01MZPJ100 chip resistor works on the principle of resistance, using a wire that is a few millimeters thick and encased in a ceramic package, which allows the resistor to be mounted onto the surface of a printed circuit board. The resistance on the wire is set with a laser, which allows engineers to customize the component’s resistance to the specific circuit they are building.The chip resistor is designed to achieve a consistent voltage drop across the surface of the board, no matter the current flow. As the current increases, the voltage drop across the resistor will remain proportional, allowing engineers to control precisely how much power is sent to each component in the system. The chip resistor also functions as an effective heat sink. As current passes through the chip, the package will dissipate the heat generated by the current flow. By controlling the current flow, the chip resistor generates consistent and reliable performance. In summary, the ESR01MZPJ100 is a chip resistor specifically designed for surface mount applications. It is used in a variety of applications, including noise and line loss compensation, ESD protection, and as a heat sink. The chip resistor is constructed from a wire encased in ceramic, and the resistance is controlled with laser technology.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description