EVM-F6SA00B25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers (TP) are used in a wide variety of applications and can be found in a plethora of devices such as radios, audio equipment, guitars, and amplifiers. Quite simply, a TP is an adjustable resistor that can be used to control a variety of different functions such as volume, frequency, or pitch. The EVM-F6SA00B25 is a type of TP that is regularly used in instrumentation, signal processing, and control systems. The TP is adjustable via a screwdriver or screwhead, and can be used to precisely calibrate settings.

The EVM-F6SA00B25 is a 6 mm trimmer potentiometer with a wide range of resistance options. It has an upper limit of 200 Ohms and a lower limit of 25 Ohms, yielding an adjustment range of 175 Ohms. It is typically used in applications in which the exact resistance setting is required.

The EVM-F6SA00B25 TP is constructed with a spindly center shaft and a cylindrical body. It has removable terminal caps that allow for easy connection to a circuit. The TP is adjustable via a screwdriver or other screwhead, and the setting can be changed in increments of 25 Ohms. This allows for precise adjustments to resistance settings.

The PTC of the EVM-F6SA00B25 is thin-film on sapphire (TFOS) construction. The total TP resistance is very low and temperature-stable, making it suitable for a wide range of applications. The TP also features a sealed linear taper technology, which allows the resistance setting to be changed over a linear range across the adjustment range.

The EVM-F6SA00B25 TP has a variety of applications, including medical instruments, automotive controls, consumer electronics, and robotics. The TP can be used to precisely adjust signal levels, volume controls, frequency settings, or other parameters within an electronic device. The PTC is also used in medical scanning equipment to provide precise readings for MRI, CT, and other imaging instruments.

The working principle behind the EVM-F6SA00B25 TP is based on the Wheatstone bridge circuit. This circuit consists of four resistors arranged in a symmetrical diamond pattern. The two outer resistors are constant values, while the internal two are variable. The TP is connected to the circuit by connecting the metal shaft to one of the internal resistors. The resistance of the TP is adjusted by turning the screw located in the center of the shaft. The adjustment causes the resistance to change, which in turn changes the output voltage of the circuit. As the resistance is changed, the output voltage of the circuit changes, allowing for precise control of a signal or device.

The EVM-F6SA00B25 TP is a reliable and accurate method of adjusting signal levels, volume control, and frequency settings. It provides a wide range of resistance options, making it suitable for a variety of applications. The PTC\'s sealed linear taper technology allows for precise adjustment of resistance settings, providing an ideal solution for instrumentation, signal processing, and control systems. With its robust construction and wide range of adjustment options, the EVM-F6SA00B25 is an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference