EVN-5CSX50B55

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers, like the EVN-5CSX50B55, are electronic components used to adjust and fine-tune electrical signals. They are widely used for controlling frequency, voltage, and current levels of electrical circuits. The EVN-5CSX50B55 is a small-sized one-turn variable resistor, or potentiometer, designed to provide reliable, accurate adjustments in radio equipment, automotive electronic systems, and anywhere where precise tuning and adjustment of electrical circuits is needed. This type of potentiometer works by using a slider shaft that is rotated inside a circular track printed on a substrate.

The EVN-5CSX50B55 is a single-turn trimmer potentiometer with a capacitance range of 0.5pF to 5pF. It is designed to be resistant to harsh environmental conditions, featuring an IP67 water resistance rating and a temperature rating of -55°C to +125°C. The potentiometer has a linear resistance track which is accurately calibrated for use in precise tuning applications.

The EVN-5CSX50B55 has three main terminals: a \'slider\', \'"+",\' and \'"-\'\'. The \'slider\' terminal is used to make the adjustment. When the slider is rotated, it increases or decreases the amount of resistance between the \'+\' and \'-\' terminals. The \'+\' and \'-\' terminals are then used to connect the potentiometer to other components in the circuit. The slider turns up to 550°, offering greater precision than a typical multi-turn potentiometer.

The EVN-5CSX50B55 is widely used in radio-frequency (RF) applications, automotive electronic systems, and medical device testing and calibration. In radio-frequency applications, its small size and precision capability make it an ideal choice for adjustments and tuning of radio-frequency circuits. In automotive electronics, the EVN-5CSX50B55 can be used to adjust, calibrate, and fine-tune car radio, climate control, and powertrain systems. Finally, in medical device testing and calibration, the potentiometer can be used for precise adjustment of dials and sliders on test and calibration equipment.

The working principle of the EVN-5CSX50B55 is the same as any other potentiometer; its resistance track causes a change in the voltage when the slider is adjusted. It is this change in the voltage that is used to control and adjust the electrical signal. When the slider is rotated, the resistance between the two terminals increases or decreases. This in turn, produces a higher or lower voltage. This voltage is then used to control and adjust the electrical circuit.

The EVN-5CSX50B55 is a reliable and accurate trimmer potentiometer that is designed to provide precise tuning and adjustment of electrical circuits. Its small size and precise adjustment capability make it an ideal choice for radio-frequency applications, automotive electronic systems, and medical device testing and calibration.

The specific data is subject to PDF, and the above content is for reference