EWT25JB2K50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors are broadly classified into two categories – fixed and variable.

The EWT25JB2K50 is an example of a chassis mount resistor, which is a type of resistor mounted to a printed circuit board. It has a resistance of 2KΩ and is rated to a 25W power dissipation over an ambient temperature range of -55 to +175°C. It is also provided with a mounting base so that it can be attached to an additional PCB, or can be connected directly to the base of a chassis.

The EWT25JB2K50 is designed for applications with both high-power and high-frequency environments, such as automotive, diode-bridge, relay, and switch controls. It is capable of providing a low-resistance connection between two points in an electrical circuit, while also isolating those points from each other.

The EWT25JB2K50 is a single-pole, single-throw (SPST) device. It is designed to be inserted into a rectifier diode array or a bridge rectifier for switching an AC signal or current. When activated, it will short-circuit the two leads of the diode array, thereby turning off the current or signal flow between them. It can handle up to 25W of power over its temperature range, making it suitable for high-power applications.

The working principle of the EWT25JB2K50 is based on the Ohm\'s law. When two points are connected in an electrical circuit, the current flow between them will be proportional to the voltage drop across them. The EWT25JB2K50 is designed to provide a low-resistance connection between the two points, thereby allowing the current to flow more easily. This is achieved by using a special construction that consists of a resistor element and a base connecting the two leads.

The base of the EWT25JB2K50 is designed to be highly conductive, so that it can act as a bridge between the two points such that the current flow between them will not be impeded by external resistance. The resistor element helps to limit the current flow rate, so that it stays within the specified parameters. The combination of the highly conductive base and the resistance element, helps to maintain a stable current flow and prevents any voltage spikes or drops.

The EWT25JB2K50 is suitable for applications such as power supplies, DC-DC converters, relay and switch controls, and diode bridge rectifiers. It can be used in both high-frequency and high-power environments, as it is capable of providing a low-resistance connection without compromising its power handling capacity.

The specific data is subject to PDF, and the above content is for reference