EX113-500-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are used in a wide range of applications, from robotics to industrial and automotive applications. They are designed to convert mechanical position to digital signals or vice versa and are typically used to measure distance, velocity and position.

EX113-500-2 is a type of encoder, developed for harsh industrial automation environments. It is designed for a pole count of up to 500 and can work either as a linear or rotary encoder. EX113-500-2 is usually coupled with the application of servo motor, stepper motor, and closed-loop application in severe radiation or high-heat environments.

The EX113-500-2 encoder utilizes cutting-edge Hall Effect technology, which is used to detect the absolute angular position of a motor. The Hall Effect sensors work by using a selection of magnets that are embedded in the rotor. The magnets interact with the Hall Effect sensors which generates a digital signal that can be translated into a position.

The EX113-500-2 is capable of supporting resolutions up to 12 bits, meaning the outputted signal can be accurate down to 0.72 degrees. Additionally, the device can be set to operate in either half-step or full-step mode, thus providing greater resolution where needed. The EX113-500-2 also provides up to three levels of protection, making it suitable for use in extreme industrial conditions. This protects the encoder from short circuiting and unwanted power fluctuations.

In addition to being highly accurate, the EX113-500-2 is also highly reliable. It is designed for a long life expectancy and can perform up to 100 million pulses per revolution without any degradation in performance. This makes the EX113-500-2 an ideal encoder for any application.

Some of the main application fields of EX113-500-2 are industrial automation, closed-loop systems, and robotics. Because it is capable of providing high-accuracy readings in extreme conditions, the EX113-500-2 is ideally suited for use in factory automation, motion control systems, and robotics. It can also be used in medical, home entertainment, and military applications.

The EX113-500-2 encoder is designed with convenience and flexibility in mind. It is easy to install and configure, and it is compatible with popular motion controllers and servo drives. This makes it relatively easy for applications to switch to the encoder without the need for extensive reconfiguration.

In conclusion, the EX113-500-2 encoder is a reliable and accurate device that is perfect for use in harsh industrial environments. It is capable of gathering highly accurate readings with minimal power consumption, and it is designed for a long life expectancy in the most extreme conditions.

The specific data is subject to PDF, and the above content is for reference