EZA-DT12AAAJ Filters |
|
Allicdata Part #: | PDT12TR-ND |
Manufacturer Part#: |
EZA-DT12AAAJ |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Panasonic Electronic Components |
Short Description: | FILTER RC(PI) 22 OHM/47PF SMD |
More Detail: | RC (Pi) EMI Filter 1st Order Low Pass 4 Channel R ... |
DataSheet: | EZA-DT12AAAJ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Resistance - Channel (Ohms): | 22 |
Height: | 0.033" (0.85mm) |
Size / Dimension: | 0.126" L x 0.063" W (3.20mm x 1.60mm) |
Package / Case: | 1206 (3216 Metric), Concave, Long Side Terminals |
Mounting Type: | Surface Mount |
Voltage - Rated: | 12V |
Applications: | Data Lines for Mobile Devices |
Operating Temperature: | -25°C ~ 85°C |
ESD Protection: | No |
Values: | R = 22 Ohms, C = 47pF |
Series: | EZADT |
Attenuation Value: | -- |
Center / Cutoff Frequency: | -- |
Number of Channels: | 4 |
Technology: | RC (Pi) |
Filter Order: | 1st |
Type: | Low Pass |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Electromagnetic interference (EMI) and radio frequency interference (RFI) filters are widely used within multiple industries and applications. These filters are used to reduce the effects of noise on signal integrity, acting as an effective subsystem within electronic equipment to protect a specific region from interference from outside sources. In this article, we will discuss the application fields and working principle of EZA-DT12AAAJ filter, which belong to EMI/RFI filters (LC, RC Networks).
EMI/RFI filters (LC, RC networks) are designed to reduce the effects of interference from external sources on an equipment’s operating signals or systems. These filters basically consist of two components, inductors and capacitors. They are available in a variety of configurations, such as single-stage, two-stage, and three-stage filters, or multi-stage complex designs.
The EZA-DT12AAAJ filter is a two-stage, two-pole EMI/RFI filter that uses only capacitors and inductors to provide maximum attenuation over a wide range of frequencies. This filter is designed to help suppress conducted noise such as ESD (electrostatic discharge) in applications such as telecommunication systems, power line communications, and power supplies.
The working principle of the EZA-DT12AAAJ filter is relatively simple. The inductors in the first stage of the filter form a low-pass filter which blocks higher frequency interference, while the capacitors act as short-circuits to minimize the impact of lower frequency interference. The second stage of the filter is a high-pass filter which blocks low frequency interference and can also provide additional protection against higher frequency interference.
The EZA-DT12AAAJ EMI/RFI filter is designed to provide high attenuation levels at frequencies between 50 kHz and 1 GHz, and has a maximum current rating of 1.2 amperes. This filter is designed for use in a wide variety of applications, including power line communications, telecommunication systems, industrial process control systems, and power supplies. In addition, this filter is also used in consumer electronics, including computers, televisions, and gaming systems.
The EZA-DT12AAAJ EMI/RFI filter is a reliable and cost-effective solution for reducing EMI/RFI interference in a variety of applications. This filter can provide effective protection against high frequency interference, and is a great option for those looking for an easy way to reduce the impacts of noise on their signal integrity.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...