EZA-DT41AAAJ Filters |
|
| Allicdata Part #: | PDT41TR-ND |
| Manufacturer Part#: |
EZA-DT41AAAJ |
| Price: | $ 0.00 |
| Product Category: | Filters |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | FILTER RC(PI) 220 OHM/22PF SMD |
| More Detail: | RC (Pi) EMI Filter 1st Order Low Pass 4 Channel R ... |
| DataSheet: |  EZA-DT41AAAJ Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Resistance - Channel (Ohms): | 220 |
| Height: | 0.033" (0.85mm) |
| Size / Dimension: | 0.126" L x 0.063" W (3.20mm x 1.60mm) |
| Package / Case: | 1206 (3216 Metric), Concave, Long Side Terminals |
| Mounting Type: | Surface Mount |
| Voltage - Rated: | 12V |
| Applications: | Data Lines for Mobile Devices |
| Operating Temperature: | -25°C ~ 85°C |
| ESD Protection: | No |
| Values: | R = 220 Ohms, C = 22pF |
| Series: | EZADT |
| Attenuation Value: | -- |
| Center / Cutoff Frequency: | -- |
| Number of Channels: | 4 |
| Technology: | RC (Pi) |
| Filter Order: | 1st |
| Type: | Low Pass |
| Part Status: | Obsolete |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
EMI/RFI Filters (LC, RC Networks) are used in a variety of applications in order to protect systems and components from signal interference. The EZA-DT41AAAJ is a type of LC filter designed for protecting from radio-frequency interference (RFI). This application field and its working principles will be explored in detail in this article.
The main application field of the EZA-DT41AAAJ is in audio and video systems such as TVs, set-top boxes, and DVD players. This LC filter is designed to reduce high-frequency noise that can affect the audio or video signals and cause them to become distorted or degraded. It is also suitable for preventing the generation of RFI from equipment, such as computers, that may be producing a lot of internal electrical noise.
The working principles of the EZA-DT41AAAJ are based on the concept of impedance matching. When an electrical signal is sent through an LC filter, the signal is split into different frequency components. Each component is then sent through separate inductors and capacitors in order to find the optimal impedance for each frequency. This creates a matching between the different frequencies of the signal and the components of the filter, which prevents the signal from being distorted.
The EZA-DT41AAAJ also provides a high level of noise reduction. It is capable of reducing up to 75 dB of common-mode RFI noise, which is much higher than the typical 20 dB of RFI noise reduction provided by a typical filter. The filter also has a low power dissipation, which makes it suitable for critical applications where power consumption is a factor.
Overall, the EZA-DT41AAAJ is a versatile and powerful LC filter designed for protecting systems and components from RFI. Its application field is largely based on audio and video systems, but it can be used in a range of other applications. Its high level of noise reduction and low power dissipation makes it a good choice for many applications where the interference of RFI is a problem.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...