EZA-DT53AAAJ Filters |
|
Allicdata Part #: | PDT53TR-ND |
Manufacturer Part#: |
EZA-DT53AAAJ |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Panasonic Electronic Components |
Short Description: | FILTER RC(PI) 470 OHM/100PF SMD |
More Detail: | RC (Pi) EMI Filter 1st Order Low Pass 4 Channel R ... |
DataSheet: | EZA-DT53AAAJ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Resistance - Channel (Ohms): | 470 |
Height: | 0.033" (0.85mm) |
Size / Dimension: | 0.126" L x 0.063" W (3.20mm x 1.60mm) |
Package / Case: | 1206 (3216 Metric), Concave, Long Side Terminals |
Mounting Type: | Surface Mount |
Voltage - Rated: | 12V |
Applications: | Data Lines for Mobile Devices |
Operating Temperature: | -25°C ~ 85°C |
ESD Protection: | No |
Values: | R = 470 Ohms, C = 100pF |
Series: | EZADT |
Attenuation Value: | -- |
Center / Cutoff Frequency: | -- |
Number of Channels: | 4 |
Technology: | RC (Pi) |
Filter Order: | 1st |
Type: | Low Pass |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EZA-DT53AAAJ is an EMI/RFI filter designed for protecting electrical circuits from radiation and power interference. The EZA-DT53AAAJ applies to a broad range of applications, such as AC/DC power systems, outdoor base station, thermoelectric generators, PLC control cabinets, emergency systems, and industrial equipment.
EMI/RFI filters are designed to reduce electromagnetic interference, and the EZA-DT53AAAJ is a common-mode filter. The common-mode filter is composed of an inductor-capacitor (LC) network and a resistor-capacitor (RC) network. Common mode filters generally have two input lines, two output lines, an RC network to reduce common-mode pulsed or sustained noise, and a LC network to reduce high-frequency electromagnetic interference and conductive disturbances.
The core of the EZA-DT53AAAJ is a ferrite core. The ferrite core works as a magnetic circuit to inductively couple different sections of a circuit and create a low-conductance path which isolates an EMI source, such as a DC motor or transformer, from the rest of the circuit. This prevents the interference from further propagating throughout the system. The ferrite core also creates a wide range of impedances when subjected to different frequencies. The combination of these characteristics works together to create a low-impedance path for high-frequency signals.
The EZA-DT53AAAJ also contains two capacitors. These capacitors act as energy storage devices and are able to absorb and dissipate the high-frequency signals caused by EMI noise. The capacitors also block DC currents from flowing and thus prevent any direct current from disrupting the circuit. Lastly, the EZA-DT53AAAJ has two resistors. These resistors reduce the amount of voltage and current applied to the critical components of the circuit, thus protecting them from any potential damage.
In summary, the EZA-DT53AAAJ has a broad application field and can be used to reduce EMI/RFI in any circuit. Its unique composition of a ferrite core, capacitors, and resistors creates a low-impedance path for high-frequency signals, while at the same time allowing for the filtering of DC current. The EZA-DT53AAAJ is an important component of any EMI/RFI system, no matter which application it is used for.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...