EZA-NT14AAAJ Filters |
|
Allicdata Part #: | PNT14TR-ND |
Manufacturer Part#: |
EZA-NT14AAAJ |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Panasonic Electronic Components |
Short Description: | FILTER RC(PI) 22 OHM/220PF SMD |
More Detail: | RC (Pi) EMI Filter 1st Order Low Pass 4 Channel R ... |
DataSheet: | EZA-NT14AAAJ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Resistance - Channel (Ohms): | 22 |
Height: | 0.039" (1.00mm) |
Size / Dimension: | 0.252" L x 0.122" W (6.40mm x 3.10mm) |
Package / Case: | 2512 (6432 Metric), Concave |
Mounting Type: | Surface Mount |
Voltage - Rated: | 50V |
Applications: | Data Lines for Mobile Devices |
Operating Temperature: | -25°C ~ 85°C |
ESD Protection: | No |
Values: | R = 22 Ohms, C = 220pF |
Series: | EZANT |
Attenuation Value: | -- |
Center / Cutoff Frequency: | -- |
Number of Channels: | 4 |
Technology: | RC (Pi) |
Filter Order: | 1st |
Type: | Low Pass |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Electromagnetic interference (EMI) and radio frequency interference (RFI) have become more and more common due to the increased use of electronics in industry, medical, and home applications. The EZA-NT14AAAJ EMI/RFI filter is a type of filter designed to reduce the potential damage caused by these sources of interference.
The EZA-NT14AAAJ is a series of low-pass LC and RC networks comprised of inductors, capacitors, and transformers that provide an effective solution to suppressing both EMI and RFI. This type of filter is primarily used to provide protection from direct interference, which is electromagnetic noise generated by nearby electronic equipment. It is also used to prevent coupling of signal noise onto sensitive electrical equipment, which is the unintentional transfer of energy from one device to another.
The EZA-NT14AAAJ filter provides three basic stages of protection. The first stage is filtering out high frequency signals through the use of inductors and capacitors. The inductors act as barriers to frequencies above a certain point, while the capacitors prevent frequencies lower than the cutoff point from passing through. This type of filtering is especially effective at attenuating high-frequency signals that can cause damage or interference with sensitive devices.
The second stage is the separation of signal noise from the intended signal. This is achieved through the use of RC networks that have high-pass and low-pass filters. The high-pass filters remove any high-frequency noise from the signal, while the low-pass filters remove lower-frequency noise.
The last stage is the reduction of common-mode noise through the use of transformers. This is done by providing a galvanic separation between the input of the filter and its output. This galvanic separation allows for the reduction of common-mode noise, which is noise that is common to both the input and output signals.
The EZA-NT14AAAJ filter is a reliable and cost-effective solution for reducing harmful interference caused by electrical equipment and providing additional protection for sensitive devices. It is perfect for applications that require a low-cost, low-profile solution for suppressing EMI and RFI.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...