EZA-NT35AAAJ Filters |
|
Allicdata Part #: | PNT35TR-ND |
Manufacturer Part#: |
EZA-NT35AAAJ |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Panasonic Electronic Components |
Short Description: | FILTER RC(PI) 100 OHM/470PF SMD |
More Detail: | RC (Pi) EMI Filter 1st Order Low Pass 4 Channel R ... |
DataSheet: | EZA-NT35AAAJ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Resistance - Channel (Ohms): | 100 |
Height: | 0.039" (1.00mm) |
Size / Dimension: | 0.252" L x 0.122" W (6.40mm x 3.10mm) |
Package / Case: | 2512 (6432 Metric), Concave |
Mounting Type: | Surface Mount |
Voltage - Rated: | 50V |
Applications: | Data Lines for Mobile Devices |
Operating Temperature: | -25°C ~ 85°C |
ESD Protection: | No |
Values: | R = 100 Ohms, C = 470pF |
Series: | EZANT |
Attenuation Value: | -- |
Center / Cutoff Frequency: | -- |
Number of Channels: | 4 |
Technology: | RC (Pi) |
Filter Order: | 1st |
Type: | Low Pass |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
EMI/RFI Filters (LC, RC Networks) are an important component of electrical wiring systems, having been used since the first electronic system was created. The EZA-NT35AAAJ is a filter with a high energy capacity that is used to protect sensitive electrical components and to reduce interferences in EMI/RFI applications. The device is commonly used in communication systems and power supplies, providing reliable and cost-effective protection.
The working principle of the EZA-NT35AAAJ is based on the concept of EMI/RFI signal disruption. It works by creating an intentional impedance mismatch in the system, which serves to disrupt the propagation of higher frequency EMI/RFI signals. These signals are blocked by the filter from entering the circuit board, thereby eliminating or minimizing their disruptive effects.
The EZA-NT35AAAJ is a versatile device that provides reliable protection in a variety of situations. It can be used in power and communications applications, as well as in industrial and medical equipment. It can also be used in computers and other electronic devices to protect against interference. In addition, the filter is also suitable for military applications, such as aircraft, radar systems, and missile guidance systems.
The EZA-NT35AAAJ consists of two individual circuits: a low-pass filter, and a high-pass filter. The low-pass filter is designed to block higher frequency EMI/RFI signals, while the high-pass filter is designed to pass lower frequency signals. Both circuits are designed to pass the desired signal with minimal loss or interference. The filter also has a feature that prevents overloading due to high-energy fluctuations.
The EZA-NT35AAAJ filter is easy to install and maintain, and it is also compatible with most existing systems. It can be used in a variety of environments, including hazardous locations, and is rated for use in a wide temperature range, making it a suitable choice for harsh environments. The filter is also designed with low power consumption, allowing it to run longer with minimal energy use.
Overall, the EZA-NT35AAAJ is an effective filter for EMI/RFI applications that offers reliable protection. It is a versatile device that is easy to install and maintain, and can be used in a variety of applications, including power and communications systems, industrial and medical equipment, computers, and military applications. The filter has a high energy capacity, providing reliable and cost-effective protection in any situation.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...