EZA-NT64AAAJ Filters |
|
| Allicdata Part #: | PNT64TR-ND |
| Manufacturer Part#: |
EZA-NT64AAAJ |
| Price: | $ 0.00 |
| Product Category: | Filters |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | FILTER RC(PI) 1 KOHM/220PF SMD |
| More Detail: | RC (Pi) EMI Filter 1st Order Low Pass 4 Channel R ... |
| DataSheet: |  EZA-NT64AAAJ Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Resistance - Channel (Ohms): | 1k |
| Height: | 0.039" (1.00mm) |
| Size / Dimension: | 0.252" L x 0.122" W (6.40mm x 3.10mm) |
| Package / Case: | 2512 (6432 Metric), Concave |
| Mounting Type: | Surface Mount |
| Voltage - Rated: | 50V |
| Applications: | Data Lines for Mobile Devices |
| Operating Temperature: | -25°C ~ 85°C |
| ESD Protection: | No |
| Values: | R = 1 kOhms, C = 220pF |
| Series: | EZANT |
| Attenuation Value: | -- |
| Center / Cutoff Frequency: | -- |
| Number of Channels: | 4 |
| Technology: | RC (Pi) |
| Filter Order: | 1st |
| Type: | Low Pass |
| Part Status: | Obsolete |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
？EMI/RFI filters are widely used in various areas such as aerospace, medical, and industrial applications. The EZA-NT64AAAJ filter is a compact and efficient filter ideal for these applications.
The filter is usually employed in digital signal processing (DSP) circuits to reduce EMI/RFI. It is designed to reduce high frequencies and also increase noise immunity, thereby increasing system stability. The filter comes in a small package with a very high current rating of up to 64 Amps.
The EZA-NT64AAAJ filter is a common-mode ferrite filter that uses an internal capacitor and ferrite beads for EMI/RFI suppression. The capacitor helps to reduce the high frequency noise, while the ferrite beads shield off higher-frequency unwanted signals. The addition of the capacitor and ferrite beads effectively increase the attenuation of the filter, allowing it to capture a wide range of EMI/RFI signals.
The working principle of the EZA-NT64AAAJ filter is based on the use of parallel LC networks, which are RC networks with the addition of a choke or inductor. These networks can be used to block high-frequency signals and also low-frequency noise. The LC networks act as a low-pass filter that is designed to reduce high-frequency signals and retain low-frequency signals.
The EZA-NT64AAAJ filter is highly effective at filtering out EMI/RFI from digital circuits. It is able to maintain good signal integrity while simultaneously reducing interference. The filter can be used in a variety of applications, such as data transmission, car audio systems, and power supply equipment.
The EZA-NT64AAAJ filter is also highly durable. It is able to withstand extreme temperatures and shock, making it ideal for applications such as in-car computers and touchscreens. The filter is also relatively easy to install, as it can be simply connected to the circuit board without the need for complex wiring.
In conclusion, the EZA-NT64AAAJ filter is an ideal choice for EMI/RFI applications. Its use of parallel LC networks and internal capacitor and ferrite beads allows it to reduce interference and maintain signal integrity. The filter is also durable, easy to install, and highly effective at filtering out unwanted EMI/RFI signals. It is an ideal choice for digital signal processing circuits and a wide variety of other applications.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...