F10J150

Operating Temperature:	-55°C ~ 350°C
Failure Rate:	--
Package / Case:	Radial, Flat Oval
Lead Style:	Solder Lugs
Height - Seated (Max):	0.375" (9.53mm)
Size / Dimension:	0.750" L x 0.375" W (19.05mm x 9.53mm)
Mounting Feature:	Flange Braces, Right Angle
Coating, Housing Type:	Vitreous Enamel Coated
Features:	--
Series:	Stackohm® 250
Temperature Coefficient:	±260ppm/°C
Composition:	Wirewound
Power (Watts):	10W
Tolerance:	±5%
Resistance:	150 Ohms
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors

The chassis mount resistor, also known as "panel mount resistor" or "thru-hole resistor" is a type of electronic component most commonly used in electronic circuits. It is a two-terminal resistor that is used to control the current flow in a circuit. This type of resistor is most commonly used in low-power, surface-mounted and through-hole electronics applications.The F10J150 is a standard-sized axial leaded low-power chassis mount resistor. It is designed for use in printed circuit boards (PCBs) and is suitable for both surface-mount and through-hole applications. The component consists of a resistor mounted on a substrate, with two leads connected to the resistor for electrical connection. The leads can be soldered directly to a PCB, or in some cases they can be soldered to a terminal block.The F10J150 is designed for use in low-power applications, and is able to handle up to 100 volts. It has a power rating of 150 mW and a resistance range of 10Ω to 1KΩ, with tolerance of ±5%. The operating temperature range of the F10J150 is -55°C to +175°C.The F10J150 chassis mount resistor works by providing a stable resistance value in an electric circuit. This resistance value is determined by the material used in the resistor and the size of the resistor. The resistance value is stable within a certain range, but will increase with higher temperature. The component also helps to limit the current flowing through a circuit to avoid damage to other components or wiring. The resistor is also used to reduce the changes in voltage by providing the necessary voltage drop.To install the F10J150, it must be soldered to the PCB before it can be connected to the circuit. To ensure proper installation, the PCB should be examined for any shorts, the solder should be applied carefully and the right amount of solder should be used. When soldering, it is important to ensure that the leads are properly aligned with the holes in the PCB and that there are no solder bridges or short circuits.In conclusion, the F10J150 chassis mount resistor is a suitable component for low-power applications in electronic circuits. It is easy to install and provides a reliable and stable resistance value. It helps to limit the current in a circuit and also helps to reduce voltage drop.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description