F1400BB10

The F1400BB10 is a power line filter module specifically designed for high current applications. It is used to filter out noise, reduce electromagnetic interference (EMI), and reduce conducted and radiated emissions. The filter is suitable for use in electric and electronic equipment where noise filtering is required. It can be used in a variety of applications including electric motors, industrial control systems, automation equipment, power electronics, lighting systems, and process control equipment.

The F1400BB10 is a surface-mount power line filter module with a wide operating range of input voltage (up to 350V) and input current (up to 7A). It is constructed in a standard PC board format, and the filter is assembled using low-impedance surface-mount material. The filter has two mounting options, top or bottom, depending on the mounting location. It is rated at 63VAC (ripple voltage 150mV) and 7A with a frequency range of 10 kHz to 400kHz.

The filter is designed to filter out noise caused by switching power supplies, AC power line noise, and conducted emissions from power supply components. It is also designed to suppress the voltage transients caused by the current inrush of the switching power supplies. The filter also reduces the conducted and radiated emissions which help reduce the level of electromagnetic interference (EMI) produced by the device.

The F1400BB10 power line filter module operates under linear principles, and utilizes multiple inductors and capacitors to reduce noise levels. It is designed with an inductor-in-series/capacitor-in-parallel configuration, which filters out the high-frequency noise. This configuration also reduces the voltage seen by the load as it provides an additional impedance path for the input noise. The filter module acts as a voltage-dependent impedance, and its impedance will vary with the frequency of the input. It is also designed to protect the load against over-voltage conditions and prevent adverse voltage transients that can damage the load.

The F1400BB10 power line filter module is packaged in a compact, surface-mount design, and is easy to install. It is UL approved, and meets the requirements of UL, CSA, and EN/IEC standards. It is also RoHS compliant. The filter is designed to provide efficient and reliable power line noise filtering, and is an ideal solution for electric and electronic equipment where noise filtering is required.

F1400BB03	Curtis Indus...	17.09 $	1000	LINE FILTER 250VAC 3A CHA...
F1402	C&K	0.3 $	1000	SWITCH CAPSwitch Cap
F1400AA10	Curtis Indus...	38.2 $	69	LINE FILTER 250VAC 10A CH...
CD214A-F1400	Bourns Inc.	0.09 $	7500	DIODE GEN PURP 400V 1A DO...
F1404	C&K	0.56 $	1000	SWITCH CAPSwitch Cap
F1401	C&K	0.54 $	1000	SWITCH CAPSwitch Cap
F1400AA03	Curtis Indus...	17.64 $	82	LINE FILTER 250VAC 3A CHA...
F1400BB06	Curtis Indus...	27.2 $	10	LINE FILTER 250VAC 6A CHA...
F1400BB10	Curtis Indus...	36.47 $	1000	LINE FILTER 250VAC 10A CH...
F1403	C&K	0.57 $	1000	SWITCH CAPSwitch Cap
CD1408-F1400	Bourns Inc.	0.06 $	21000	DIODE GEN PURP 400V 1A 14...
F1400AA06	Curtis Indus...	26.34 $	1000	LINE FILTER 250VAC 6A CHA...
F1400CA06	Curtis Indus...	29.33 $	1000	PWR ENT MOD RCPT IEC320-C...
F1400CA03	Curtis Indus...	20.14 $	1000	PWR ENT MOD RCPT IEC320-C...