Allicdata Part #: | F1953NCGI8-ND |
Manufacturer Part#: |
F1953NCGI8 |
Price: | $ 2.18 |
Product Category: | RF/IF and RFID |
Manufacturer: | IDT, Integrated Device Technology Inc |
Short Description: | RF |
More Detail: | RF Attenuator 0.5dB 400MHz ~ 4GHz |
DataSheet: | F1953NCGI8 Datasheet/PDF |
Quantity: | 1000 |
4000 +: | $ 1.98582 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Attenuation Value: | 0.5dB |
Frequency Range: | 400MHz ~ 4GHz |
Power (Watts): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators, such as the F1953NCGI8, are used in most electrical and electronic systems to reduce the amplitude of signals passing through them. This is done by giving resistance in the signal path, which restricts its flow and, in turn, reduces its amplitude. Attenuators are typically available in various resistances and power levels, and they are available in both linear and logarithmic designs.
The F1953NCGI8 is a linear attenuator with a built-in 3 dB flat attenuation frequency range of 1.5 MHz to 3.0 MHz. The attenuator is designed for low power applications, with a power rating of 1 W maximum. It is also designed to be used in environments with temperatures ranging from -55°C to +125°C. This is done by providing extra insulation on terminal pins and breaking down the air gap.
The working principle of the F1953NCGI8 is relatively straightforward. When a signal is sent through the attenuator, the impedance inside the unit restricts the flow of the signal, resulting in a reduction of the amplitude of the signal. The amount of attenuation can be adjusted depending on the resistance of the attenuator, which can be maximally optimized using a potentiometer. The use of a potentiometer also allows for the gain to be adjusted, which can be achieved by changing the resistance and conducting testing.
The primary application of the F1953NCGI8 is in the telecommunications industry, where it is used to reduce interference in radio frequency radio link systems. It is used to reduce unwanted signals or the overall average value of a signal while preserving its signal-to-noise ratio (SNR). It is also used as a tool for precision testing applications, and in some cases, for signal analysis. Due to its low power rating, the F1953NCGI8 is generally not suitable for high power applications, however, its low noise performance makes it ideal for low power and short range stations.
The F1953NCGI8 is an ideal tool for precise signal attenuation applications and is well suited for use in radio link transmissions where all signals, including unwanted ones, have to be attenuated to reduce noise and interference levels. It is also suitable for use in precision testing and analysis applications as it offers good attenuation performance and low noise. Its low power rating makes it best suitable for lower power and short range stations.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
F1950NBGI | IDT, Integra... | 4.52 $ | 1629 | IC ATTENUATOR 7BIT 24VFQF... |
F1956NBGI | IDT, Integra... | 5.15 $ | 5755 | IC RF ATTENUATOR 32TQFNRF... |
F1951NBGI | IDT, Integra... | 4.6 $ | 863 | IC ATTENUATOR 6BIT 24VFQF... |
F1953NCGI | IDT, Integra... | 4.6 $ | 377 | IC ATTENUATOR 6BIT 20VFQF... |
F1953NCGI8 | IDT, Integra... | 2.18 $ | 1000 | RFRF Attenuator 0.5dB 40... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...