F30J10RE

Operating Temperature:	-55°C ~ 350°C
Failure Rate:	--
Package / Case:	Radial, Flat Oval
Lead Style:	Solder Lugs
Height - Seated (Max):	0.563" (14.29mm)
Size / Dimension:	1.250" L x 1.000" W (31.75mm x 25.40mm)
Mounting Feature:	Flange Braces, Right Angle
Coating, Housing Type:	Vitreous Enamel Coated
Features:	--
Series:	Stackohm® 250
Temperature Coefficient:	±400ppm/°C
Composition:	Wirewound
Power (Watts):	30W
Tolerance:	±5%
Resistance:	10 Ohms
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount ResistorsThe F30J10RE are a range of chassis mount resistors, providing a wide range of value and resistance capabilities from 1ohm to 10Megohm. These resistors are suitable for use in both domestic and industrial applications, due to their durability, robust construction and low cost.The F30J10RE is a radial-leaded, non-inductive resistive element that has an epoxy-coated ceramic body. The resistance is determined by the length of the ceramic body and the two-layer wire windings, which act as an electrical conductor. The winding method used to form the resistor is an integral part of the design process, which ensures that the F30J10RE has a high accuracy of ±3% with low power dissipation. As a result, the resistor is suitable for high-precision applications and can withstand a maximum operating temperature of 125°C.The F30J10RE range of chassis mount resistors are also suited for a variety of applications due to the ability to choose from a variety of lead sizes. If a large heat dissipation is required for the application, the size of the lead can be increased to provide greater power dissipation.The F30J10RE has a variety of applications in both the industrial and domestic sector, which include use in audio systems, automotive electronics, instrumentation and motion control systems. The resistors are suited to use in high-voltage applications, as they are able to withstand up to 1KV with a peak current of 200mA. Additionally, the F30J10RE have the potential to be used in safety-critical applications, as they have a high resistance-to-heat ratio, which prevents any significant under or over-estimation of the working voltage.In terms of working principle, the F30J10RE uses the Ohm’s law to determine the resistance of the resistor. Ohm’s law states that the voltage across the resistor is equal to the current flowing through the resistor multiplied by its resistance. Therefore, the higher the resistance of the F30J10RE, the lower the voltage across it.Furthermore, the F30J10RE is also suitable for use as a potentiometer, providing adjustable resistance to electronics circuits. The potentiometer is connected to the flat body of the resistor, and the leads are connected to either end of the resistor. As the potentiometer is rotated, it alters the resistance of the resistor depending on the position of the potentiometer. This enables the designer to adjust the overall resistance of the circuit to suit their needs.In summary, the F30J10RE is a range of chassis mount resistors that are suitable for use in both domestic and industrial applications. The F30J10RE has a wide range of resistance values and a high accuracy of ±3%. It is able to withstand up to 1KV with a peak current of 200mA and can also be used as a potentiometer, providing adjustable resistance to electronics circuits. The F30J10RE is a reliable, cost-efficient solution to providing a resistive element in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description