F3EM2-018-600-AV

Series:	--
Part Status:	Active
Sensing Method:	Through-Beam
Sensing Distance:	590.551" (15m)
Voltage - Supply:	24VDC
Response Time:	4ms
Output Configuration:	Analog
Connection Method:	Connector
Ingress Protection:	IEC IP65
Light Source:	Infrared (880nm)
Adjustment Type:	--
Operating Temperature:	-10°C ~ 55°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

F3EM2-018-600-AV is a type of Optical Sensors - Photoelectric, Industrial, which is widely used in both industrial and commercial applications. It consists of a photosensitive element and a light source, usually a light-emitting diode or a laser. The light from the light source is emitted in a certain direction and falls upon the photosensitive element. The light is then converted into an electrical signal which is used as a trigger for system operations such as automation control, monitoring and surveillance.

Application Field

F3EM2-018-600-AV is primarily used in industrial and commercial applications. In industrial applications, it can be found in the detection and control of machinery, conveyor systems, and level controls. It is also used in the monitoring of hazardous environments such as nuclear power plants, hazardous chemical plants, and oil rigs. It can also be used in medical applications such as blood oxygen analysis and ion chromatography.In commercial applications, the F3EM2-018-600-AV can be used for access control, security applications, automatic door openers, automated entrance systems, ID verification, and surveillance. It can also be used for machine vision systems in industrial automation.

Working Principle

The working principle of F3EM2-018-600-AV is based on the photoelectric effect. This effect occurs when light is emitted from a light source, such as a light-emitting diode or a laser. The light beam is directed towards a photosensitive element which is made up of a photosensitive material. The energy from the light beam is absorbed by the photosensitive material and converted into electric energy which then triggers an electrical impulse. The electrical impulse is used as a trigger signal to activate a variety of operations such as automation control, monitoring and surveillance. In some applications, the electrical impulse is also used for testing and calibration of the system.

Conclusion

F3EM2-018-600-AV is a type of Optical Sensors - Photoelectric, Industrial, which is widely used in both industrial and commercial applications. It consists of a photosensitive element and a light source and works by converting light energy from the light source into electrical energy which is then used to trigger operations. It can be used for a variety of applications such as access control, security, surveillance, machine vision systems, and automated entrance systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description