F6QA1G950M2AA-J Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are a type of passive filters capable of performing multiple filtering functions at once. The F6QA1G950M2AA-J filter is a SAW filter designed to provide a highly selective, low insertion loss bandpass filter with reactive elements integrated into the filter. The filter is designed for use in Wi-Fi-enabled applications and specifically in the 2.4 to 2.5 GHz frequency range.

The F6QA1G950M2AA-J is a single-ended Chebyshev bandpass filter that features a wide stopband and a low group delay variability. It can be used for filtering out unwanted harmonics in the Very High Frequency (VHF) range and eliminating intermodulation distortion in the Very Low Frequency (VLF) range. The filter can also be used to pass only narrowband signals, such as those from Wi-Fi antennas. In addition, the filter is tuned and tested over the specified frequency range to provide maximum out-of-band rejection while maintaining low insertion loss.

The basic functioning of the F6QA1G950M2AA-J filter is similar to that of other SAW filters. It consists of two parts: a quartz substrate and a transducer pattern. The quartz substrate functions as a resonator and a conductor of mechanical wave energy. The transducer pattern is made up of interdigital capacitors and inductors. These components create a frequency-dependent energy transfer between the signal and the substrate. This energy transfer is referred to as surface acoustic wave propagation and provides the basis for the filter\'s function.

In operation, the input signal is sent to the transducers. The energy of the signal is then transferred to the quartz substrate, creating an acoustic wave which propagates within the quartz. As the wave passes through, the frequency-dependent elements interact with the wave, causing a frequency-selective filter process. The wave also interacts with the resistors, diodes, and other reactive elements integrated into the filter, allowing the design to be tuned for the desired frequency response.

At the output, the wave propagates back to the trigger electrodes, sending the filtered signal to the outputs of the filter. The filter then provides a clean, filtered signal at its outputs that can be used in the circuit without the need for additional filtering components.

The F6QA1G950M2AA-J SAW filter is well suited for use in Wi-Fi-enabled applications. The integrated reactive elements provide a combination of low insertion loss, wide stopband, and low group delay variability, making it an ideal choice for Wi-Fi antennas. The filter also features high performance over the frequency range of 2.4 to 2.5 GHz, making it suitable for use in other applications as well.

The specific data is subject to PDF, and the above content is for reference