FBR07VA121NB-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips are very important components in designing electronic applications.They offer the ability to suppress noise, enhance signal integrity, prevent signal loss and control power dissipation.A FBR07VA121NB-00 is a ferrite bead which is commonly used in electronics applications as low-pass filter element.

Application Field

The FBR07VA121NB-00 is designed for use in general-purpose noise suppression applications.It is a surface mounted component which helps to reduce interference from high frequency interference signals.It is most commonly used for applications where the frequencies are between 1MHz and 3MHz.Such applications include;

• Automotive Electronics
• Consumer Electronics
• Industrial Electronics
• Audio Equipment
• PC Systems
• Communications Systems

Working Principle

The working principle of the FBR07VA121NB-00 is based on the principle of induction.The ferrite bead is made up of a fine coil of wire wrapped around a ferrite core.When a high frequency interference signal is passed through the ferrite bead, the inductance of the ferrite causes the current to become unstable, which in turn reduces the amplitude of the signal.The ferrite bead also acts as a shield which blocks out the interference signal, thereby improving the signal-to-noise ratio.

The FBR07VA121NB-00 has a high saturation current rating of 39A, which ensures that it is able to handle very high-frequency interference signals without any form of degradation.The ferrite bead also has a low resistance value of 3.9 ohms, making it suitable for use in high-frequency applications.The FBR07VA121NB-00 is available in a variety of sizes and shapes depending on the application requirements.

Conclusion

The FBR07VA121NB-00 is a ferrite bead which is commonly used in automotive, consumer, industrial, audio and communications systems applications.It is designed for use in general-purpose noise suppression applications, where the frequencies are between 1MHz and 3MHz.The working principle of the ferrite bead is based on the principle of induction, which helps to reduce interference from high frequency interference signals.It has a high saturation current rating of 39A and a low resistance value of 3.9 ohms, making it suitable for use in high-frequency applications.

The specific data is subject to PDF, and the above content is for reference