Allicdata Part #: | 179-2179-ND |
Manufacturer Part#: |
FC100V10A |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Bel Power Solutions |
Short Description: | LINE FILTER 100VDC 10A TH |
More Detail: | N/A |
DataSheet: | FC100V10A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | FC |
Part Status: | Obsolete |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 100V |
Voltage - Rated AC: | -- |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | -- |
Operating Temperature: | -40°C ~ 100°C |
Mounting Type: | Through Hole |
Termination Style: | PC Pins |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
As part of the wide range of power line filter systems, the FC100v10a filter module is a sophisticated piece of engineering designed to reduce the effect of conducted emissions and to protect equipment against the adverse effects of electrical interference. The unit comprises a combination of inductors and capacitors which act together to reduce conducted emissions in the signal or power supply lines.
The FC100V10A is installed across the AC line input voltage and provides isolation between the load and the AC power source. Its purpose is to reduce the effects of interfering radio frequency (RF) signals, according to government restrictions. It has two important functions - to suppress unwanted high-frequency signals and to prevent local RF energy from entering or escaping the enclosure, which could affect other functions, or cause safety hazards. The module\'s topology consists of a capacitor-inductor (C-L) filter, which can provide better performance than common solutions such as ferrite beads.
The capacitors used in the FC100v10a are designed to be low impedance to the desired signal frequencies, while blocking higher-frequency components. This provides attenuation of interfering signals and helps to limit the entry and exit of unwanted RF energy from the system. The inductors act as energy storage elements and reduce the amount of high-frequency noise that can enter and exit the system. The characteristics of the filter depend on the combination of the inductors and capacitors used, which includes the type and value of components used.
The FC100V10A is an effective power line filter module with many advantages over other solutions. It is easy to install and can be used in any application where line voltage is used. Also, its use in electronic systems reduces the need for complicated shielding and helps to improve the overall system performance. The module\'s small size also makes it suitable for many applications where space is limited. Its cost-effectiveness and reliable performance make it a great option for power line filter systems.
The FC100V10A is well-suited for use in a wide range of electronic systems, including automotive, medical, telecommunication, and avionics systems. The module works effectively in both noisy environments and in areas with low levels of interference. It achieves outstanding performance while meeting all relevant safety requirements and international standards. In addition, it is designed to provide the highest levels of efficiency and reliability.
The FC100V10A is a well-designed power line filter module with superior performance and reliability. With its combination of low-impedance capacitors and inductors, the module is able to provide substantial reductions in conducted emissions. The avionics system can remain free from the effects of unwanted interference due to its effective RF filtering capabilities. Additionally, its small size and cost-effectiveness make it a preferred choice for power line filter systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
P170NPD-FC10AR10K | TT Electroni... | 0.29 $ | 1000 | POTENTIOMETEROhm Gang ... |
P170NPD-FC10BR10K | TT Electroni... | 0.29 $ | 1000 | POTENTIOMETEROhm Gang ... |
G125-FC10605L0-0150F | Harwin Inc. | 15.28 $ | 1000 | 1.25MM F/F 6POS 26AWG 150... |
FC100V6A | Bel Power So... | -- | 1000 | DC-DC INP FILTER 6A |
G125-FC10605L0-0150L | Harwin Inc. | 10.28 $ | 1000 | 1.25MM F/L 6POS 26AWG 150... |
G125-FC10605L0-0450L | Harwin Inc. | 14.05 $ | 1000 | 1.25MM F/L 6POS 26AWG 450... |
FC100V5A-G | Bel Power So... | 10.25 $ | 294 | LINE FILTER 100VDC 5A TH |
FC100V10A-G | Bel Power So... | 11.38 $ | 565 | LINE FILTER 100VDC 10A TH |
ELJ-FC101KF | Panasonic El... | 0.0 $ | 1000 | FIXED IND 100UH 60MA 21 O... |
FC100V5A | Bel Power So... | -- | 1000 | LINE FILTER 100VDC 5A TH |
FC100V10A | Bel Power So... | 0.0 $ | 1000 | LINE FILTER 100VDC 10A TH |
FC100V20A | Bel Power So... | 0.0 $ | 1000 | LINE FILTER 100VDC 20A TH |
G125-FC10605L0-0300F | Harwin Inc. | 17.68 $ | 1000 | 1.25MM F/F 6POS 26AWG 300... |
FC100V20A-G | Bel Power So... | 17.32 $ | 1000 | LINE FILTER 100VDC 20A TH |
ELJ-FC100JF | Panasonic El... | 0.0 $ | 1000 | FIXED IND 10UH 80MA 3.7 O... |
ELJ-FC101JF | Panasonic El... | 0.0 $ | 1000 | FIXED IND 100UH 60MA 21 O... |
ELJ-FC100KF | Panasonic El... | 0.0 $ | 1000 | FIXED IND 10UH 80MA 3.7 O... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT