FCA-125-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

    Power Relays, Over 2 Amps, are devices that facilitate the transmission and control of electrical signals in an application or system. The major application of a power relay is to allow control with a low-power signal to control a higher power. The FCA-125-7 is an example of a power relay that falls under this category. The FCA-125-7 is used to control operations when a high-power signal is necessary. Understanding the workings of this relay is key to utilizing it in application properly.

    The FCA-125-7 is a single pole, double throw (SPDT) power relay. It is a three-terminal device that utilizes an outer coil, a Common contact, and a Normally Closed contact. The outer coil has two connection points to the relay- the Common contact and the Normally Closed contact. When power is applied, the outer coil activates, and the connection between the Common contact and the Normally Closed contact is established. When power is removed, the outer coil deactivates and the connection between the Common contact and the Normally Closed contact is released.

    The FCA-125-7 is best suited for applications involving high power signals that require control. These can range from applications in industrial motor control, railway signaling, public address, emergency lighting, and security systems. The relay has a nominal voltage of 250V and can handle a maximum current of 10A and a maximum voltage of 7.5KV at 50/60 Hz. The coil resistance is between 48Ω and 60Ω and the contact resistance is between 30mΩ to 50mΩ. The relay has a mechanical life of one million operations and is environmentally sealed to protect against dust, moisture, and other contaminants.

    Installation of the FCA-125-7 is relatively simple. First, secure the relay in its proper mounting location and connect an appropriate power source to the outer coil. Depending on the type of connection, the power source may be either DC or AC. It is important to ensure that the power source is within the rated voltage and current limits of the relay. Once the power source is connected, connect the Common contact and the Normally Closed contact to the application. The contacts should now be properly wired.

    To decontrol the FCA-125-7, the power source must be disconnected. When power is removed from the relay, the connection between the Common contact and the Normally Closed contact will be released. The relay can then be disconnected from the application and the wiring removed. The FCA-125-7 is a robust device and can withstand high power signals, making it a reliable and effective solution for power control and switching.

    In conclusion, the FCA-125-7 is a robust and reliable power relay that is designed to control operations when a high-power signal is necessary. This relay is best suited for applications in industrial motor control, railway signaling, public address, emergency lighting, and security systems. Understanding the workings of this relay and proper installation of the relay will ensure that the application will remain safe and secure. The FCA-125-7 is a dependable device and a valuable component for many applications.

The specific data is subject to PDF, and the above content is for reference