FCA-125-DY8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

The FCA-125-DY8 is a type of power relay designed to control and regulate high voltage and current applications. It is rated at over 2 amperes, making it ideal for powering larger electronic systems, motors and other devices. The FCA-125-DY8 features a hermetically sealed contact block that is designed to offer superior protection from moisture, dust, dirt and other environmental factors.

The FCA-125-DY8 is comprised of several components, including a contact block, a coil, and a control module. The contact block is the main component and contains the two main contacts of the relay – the normally closed (NC) contact and the normally open (NO) contact. The NC contact is the normally closed position and is covered by insulation material. The NO contact is the normally open position and is exposed to electrical current. The contact block is usually mounted in a plastic housing and can either be a single contact block or two contact blocks interconnected.

The coil is the moving part of the relay and is normally located on a printed circuit board (PCB). It is made up of a coil of wire which is used to create a magnetic field when energized. This field acts on a contact, moving it from the open to the closed position, depending on the direction of the current from the coil.

The control module is used to control the energizing of the coil. The module can be a manual switch or a timer. It is important to note that the control module should be able to handle the current requirements of the coil, which can range from 1 to several hundred amperes.

In order to use the FCA-125-DY8 power relay, the control module must first be energized. Once this is done, the coil will be activated, causing the contact to move from the open to the closed position. This action completes the electrical circuit and powers the device that is connected to the relay.

The FCA-125-DY8 is designed to be easy to use and will work in many high voltage and current applications. It is rated to operate up to 500 volts AC and will switch up to a maximum of 5 amperes. The relay is also UL listed for safety and meets all applicable safety standards.

In conclusion, the FCA-125-DY8 is a type of power relay designed to control and regulate high voltage and current applications. It is rated at over 2 amperes and features a hermetically sealed contact block and a control module. The relay is easy to use and works in many different high voltage and current applications. In addition, it is UL listed and meets all safety standards.

The specific data is subject to PDF, and the above content is for reference