FCA615RJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors refer to resistors that are designed for use on circuit boards or wherever components must be securely mounted. Through hole components consist of two basic mounting methods: board-mounted and socket-mounted resistors. The FCA615RJ is an example of a Through Hole Resistor.

FCA615RJ Through Hole Resistors are normally used in precision power supplies, amplifier circuits, hybrid circuits, mixers and impedance matching circuits due to their low resistance values, low power requirements, and low temperature coefficient of resistance. They are a type of resistor that is comprised of a fixed circuit element that restricts electric current flow, and can be used for both current and voltage control in electronic circuits. The maximum power rating for the FCA615RJ is 3W, maintaining absolute power of 0-10W, so it cannot be used for applications with a high power demand. Typically, the FCA615RJ is utilized in circuits that require very little power to operate.

The working principle of the FCA615RJ Through Hole Resistor is based off the principle of electricity resistance. The resistor works by limiting the amount of electric current that passes through the component. This is accomplished by the resistor’s material resists the flow of electricity in the form of a resistance. The higher the resistance of the material, the lower the current that can flow through the resistor. The amount of current is regulated by varying the resistance, and this is always stated in ohms, defined as one volt across one ohm of resistance produces a current of one ampere (1V/1 Ω = 1A).

The resistance element of the FCA615RJ Through Hole Resistor is a one piece, non-inductive and non-polarized, meaning the resistor has a symmetrical electrical and thermal character, providing a stable and consistent performance. The resistor is encased by a robust, fireproof construction, and is also non-inflammable, providing an additional level of protection for the environment and user. Plus, the resistor has a moisture-proof construction making it perfect for environments where water or humidity could be present.

The FCA615RJ Through Hole Resistor is suitable for both AC and DC circuits, specifically in industrial control circuits, power supplies, audio amplifiers, and for digital circuits and switch mode power supplies. The resistor has a low temperature coefficient of resistance, high voltage rating, high insulation resistance, and high thermal stability. Additionally, the resistor has a wide range of resistance values, making it suitable for many applications.

In sum, the FCA615RJ Through Hole Resistor is a power resistor suitable for precision power supplies, amplifier circuits, hybrid circuits, mixers and impedance matching circuits due to its low resistance value, low power requirement, and low temperature coefficient of resistance. The resistor is encased by a robust, fireproof construction to provide protection for the environment and user, as well as an additional layer of insulation against water, humidity, and dust. The resistor also has a wide range of resistance values, making it suitable for a number of applications.

The specific data is subject to PDF, and the above content is for reference