FCB-405-0617M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays, with ratings over 2 Amps, are a common choice for applications requiring the use of electromechanical switching devices. The FCB-405-0617M is one example of such a device. Therefore, an understanding of its application field and working principle is settled to be discussed in the following text.

With a continuous current rating of 6A and a maximum voltage rating of 240V AC, the FCB-405-0617M is suited for various applications where devices require the use of electromechanical switching. For example, because of its high current rating, the FCB-405-0617M is especially suitable for use in motor control circuits, switching circuits, and other light-duty applications.

Additionally, the FCB-405-0617M provides superior performance when compared to other power relays with ratings over 2 Amps. A key contributing factor to this performance is the power relay\'s design. Specifically, the FCB-405-0617M features a double-pole, single-throw (DPST) configuration, which provides double the current output of a single-pole, single-throw (SPST) relay, while at the same time using less space and reducing design complexity.

This power relay is also designed with five internal terminals. Of these, two are normally open and three are normally closed. This allows users to have a wide variety of switching configurations. With the proper wiring, users can also configure the relay for normally open or normally closed contact operation.

The FCB-405-0617M features a low power consumption of 2.1 Watts and a coil resistance of 131 ohms, which helps maximize the relay\'s performance and efficiency. Additionally, the power relay comes with a capability of 1000 pickups and releases per hour with a life expectancy of 100,000 cycles, making it a reliable choice for a wide variety of operations.

The working principle of the FCB-405-0617M is straightforward. A coil inside the relay causes a set of moving arms to move in or out depending on the voltage applied to the coil. When the coil is energized, the moving arms push the contact points open, or vice versa depending on the type of contact points used. The current flows when the contact points are closed and stops when they are open.

In conclusion, the FCB-405-0617M is a high-quality power relay with ratings over 2 Amps, specifically designed for applications requiring electromechanical switching. With its superior performance and low power consumption, the FCB-405-0617M is a reliable aerospace choice for motor control, and a wealth of other light-duty applications.

The specific data is subject to PDF, and the above content is for reference