FCE17B25SC480

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D-Sub connectors are widely used for their versatility and relatively low-cost. The FC17B25SC480 is a member of a larger family of rectangular connectors, each with a specific purpose. This particular connector type has been widely used in electronic equipment, including cars, computers, networking equipment, and many specialty applications.

The product code FC17B25SC480 stands for the following: FC stands for solder type, B stands for bracket mount, 25 stands for the front part of the connector has 25 pins, and SC480 stands for a 22-dip board mount with an 0.080" pitch. It is one of the most commonly used D-sub connectors in industrial applications.

This connector comes in two common configurations, one in solder type (PCB mount) and one on bracket type (front mount). The solder PC connector is mounted on a printed circuit board and the bracket type is mounted on the front panel of an electronic device. The advantages of using the PC type include a lower cost and better stability. The advantage to using the bracket type is more flexibility when mounting and connecting.

The structure of FC17B25SC480 is quite simple. It is composed of two metal parts, an outer metal shell with symmetrical screw holes and an inner metal shell with symmetrical screw holes. The outer and inner shells have a standard number of pins and mating slots. Inside the connector, there are two conductors - one for power and the other for signal, and a shield for grounding. A dielectric material is applied to the connector to prevent the possibility of short circuit.

The working principle of FC17B25SC480 is quite straightforward. When the male and female contacts are mated, the conductors within the connector will form a direct electrical connection between the two components. The contact between the conductors is maintained by either a spring force, or by metal-to-metal contact that is created when the contacts are pushed together. The shielding material associated with the connector serves to protect against electromagnetic and radio frequency interference.

Overall, the FC17B25SC480 is an excellent choice for many industrial applications. Its low-cost, ease of use, and stability make it one of the most commonly used D-Sub connectors. It is important to remember that this product code specifically refers to the solder type PC connector, and that the bracket type is slightly different. Also, the structure of the connector may vary depending on the application, so it is important to run tests or double check the specifications before purchasing.

The specific data is subject to PDF, and the above content is for reference