FCE17E09PB6DB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D-Sub connectors, as the name suggests, are an integral part of the computer and communication equipment. These connectors are also known as the “D-Type” or “DB-Type” connectors, which are typically found in the back of the computer. The standard D-Sub connector is an important connector used in serial communication and it supports several types of communication including the RS-232, EIA422, RS-485, and ISA (Industry Standard Architecture). The number of contacts per unit varies from two to sixty and the working voltage of the D-Sub connector defaults to five volts. Moreover, D-Sub connectors are typically made up of a metal shell with contact on the inside and are designed for use in high-voltage cable assemblies, where a combination of safety, electrical insulation and far-reaching interfaces are necessary.

FCE17E09PB6DB is a type of 9-pin D-Sub connector, as part of the E series, which is a product of the FCT Electronic Series. This particular series is designed for the use of power mating and single-bank connectors, which are suitable for the development of wire-to-board cable connectors. The E Series has a total of nine product ranges available; with the FC17E09PB6DB being a 9-pin unshielded connector with the same number of pins on the opposite side. It features a female header with 6 contacts on each side, with a low-level current rating of 2A at 250V. It has a wiring connection where the coding pin is black and the insulating pin is white. It is also a straight-through connection, with a mounting hole on each side for the (M4x0.7) screws.

The primary applications for the FC17E09PB6DB connector are for the RS232 cables, RS423 cables, and other cable connectors used in the computer and network communication industry. This particular type of wired connector is ideal for applications that require a reliable communication path between multiple devices interconnected via a serial connection. It is also suitable for testing purposes since it is relatively easy to assemble and configure. Moreover, since the FC17E09PB6DB connector features a locking clamp, it ensures that the connection does not easily get detached during use.

The working principle of the FCE17E09PB6DB connector involves the insertion of the metal pins into the female header of the connector. This creates an electrical connection between the devices, which in turn facilitates the transmission of serial data between the interconnected devices. Once the electrical connection is made, it is maintained during the operation of the device, until it is disconnected. This particular type of wired connector is designed to provide a reliable data transmission and minimal interference. Moreover, since this type of connector is designed with safety and insulation requirements, it is suitable for use in a variety of environments.

In conclusion, the FCE17E09PB6DB is a type of 9-pin D-Sub connector from the FCT electronic series. It is designed for the use of power and single-bank connectors, and is primarily used for RS232 and RS423 applications. The working principle involves the insertion of electrical pins to the female header of the connector in order to create an electrical connection between the devices. This type of wired connector is reliable and provides minimal interruptions, thereby making it suitable for various applications in the industry.

The specific data is subject to PDF, and the above content is for reference