FCR1WSJT-52-180R

Series:	FCR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	180 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Carbon Film
Features:	Flame Proof, Safety
Temperature Coefficient:	-500/ +350ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: Through hole resistors are devices used in electrical engineering that are typically found in most electronic products due to their small size and low cost. Resistors are used for a variety of purposes, but in general, they have the same basic function: to limit electrical current. The FCR1WSJT-52-180R is one type of through hole resistor. This article will discuss the application field and working principle of this type of resistor.Application Field:The FCR1WSJT-52-180R is an aluminum encased resistive unit with a range of values from 1 to 10 ohms. It is designed to be mounted in a PCB (Printed Circuit Board) in order to control electrical circuits. With its small size and low price, the FCR1WSJT-52-180R is often used in circuits where size and cost are factors, such as high-frequency circuits and small-footprint applications.The FCR1WSJT-52-180R is also a great choice for high-power applications due to its ability to dissipate large amounts of power over a wide temperature range. In addition, it is also capable of maintaining tight tolerances, making it a reliable choice for precision electronic applications.Working Principle:The working principle of the FCR1WSJT-52-180R is based on the relationship between resistance and electrical current. When an electric current flows through the resistor, a certain amount of energy is dissipated, and this energy is measured in terms of resistance. The FCR1WSJT-52-180R is made up of a wire wound, ceramic core with an aluminum case. An insulating layer is used to separate the inner wire from the outer aluminum case. The wire is then wound in a specially designed pattern to create different resistances. The aluminum case helps to protect the wire and dissipate heat, while the insulating layer prevents electrical current from flowing between the wire and the aluminum case. Due to its aluminum case and insulation, the FCR1WSJT-52-180R is able to maintain precise resistances values over a wide range of temperatures.Conclusion: The FCR1WSJT-52-180R is a reliable through hole resistor with a wide range of applications. It is typically used in high-frequency circuits and small-footprint applications due to its small size and low cost. In addition, it is designed to be mounted on a PCB and is capable of dissipating large amounts of power over a wide temperature range and maintain tight tolerances. Its working principle is based on the relationship between resistance and electrical current and is made up of a wire wound ceramic core with an aluminum case.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description