Allicdata Part #: | FCR200JR-73-330K-ND |
Manufacturer Part#: |
FCR200JR-73-330K |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES 2W 5% AXIAL |
More Detail: | 330 kOhms ±5% 2W Through Hole Resistor Axial Flame... |
DataSheet: | FCR200JR-73-330K Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.02399 |
Series: | FCR |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 330 kOhms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Carbon Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | 0/ -500ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.197" Dia x 0.610" L (5.00mm x 15.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are one of the most commonly used components in electrical/electronics or other work applications. The FCR200JR-73-330K resistor is a commonly seen version of this type of component. It has a limited application field and works on the principle of resistive networks, where the resistance of a component is associated with the electrical current passing through it, and the power dissipated in the component, and this helps to determine the circuit conditions.
The FCR200JR-73-330K resistor is generally used in DC (direct current) circuits, and works based on Ohm\'s law, a fundamental law of electricity which determines the current flowing through a circuit based on the voltage applied to it, and the resistance of the circuit. Since resistors are key components in any circuit, choosing the right type of resistor is essential for proper functionality. The FCR200JR-73-330K resistor offers a resistance of 330K Ohm (330,000 Ohms). This makes it suitable for applications in which a varying resistance is required, such as in a voltage regulator circuit, or for providing circuit isolation for control circuits.
The FCR200JR-73-330K resistor has a power rating of 0.25 W, meaning that it will dissipate only 0.25 W of power when in use. This makes it suitable for use in many mid- to low-power applications, such as in LED lighting circuits, or in circuits with low operating voltages. The resistor also has a tolerance of 5%, meaning that the resistance can vary by as much as + or - 5%. This is a bit on the high side compared to some other resistors, but it is still acceptable for many applications.
The FCR200JR-73-330K resistor is also rated to 6.3V max, meaning that it has an upper limit of 6.3V, beyond which it may be damaged. This is important to bear in mind when designing circuits, as the resistor should never be overloaded with too much current or voltage. The resistor is also suitable for low-frequency applications, with a frequency response of up to 150 kHz.
The FCR200JR-73-330K resistor is constructed from a high-quality nickel-chromium alloy, giving it good electrical and mechanical stability over a wide range of temperatures and operating conditions. The resistor also features a ceramic core, surrounded by an outer sleeve, both of which contribute to the stability of the resistor. As with all resistors, the FCR200JR-73-330K also has a reverse polarity protection, ensuring that it cannot be damaged by reverse voltage.
As a through-hole resistor, the FCR200JR-73-330K is designed to be attached to the board through an insulated metal tube in which the leads of the resistor are inserted. This ensures a reliable electrical connection to the circuit board. The resistor can be soldered to the board or in some cases, a plated hole can be used to secure the resistor in place. The leads of the resistor are color-coded, which helps in identifying which lead is to be attached to which circuit point on the board.
To sum up, the FCR200JR-73-330K is a type of through-hole resistor, with a resistance of 330K and a power rating of 0.25 W, making it suitable for a wide range of mid- to low-power applications. It works on the principle of resistive networks, where the resistance of the component is associated with the current flowing through it. The resistor is constructed from a high-quality nickel-chromium alloy, and features a high tolerance level of + or - 5%. The resistance is rated to 6.3V max, and it has a frequency response of up to 150 kHz. The FCR200JR-73-330K also has reverse polarity protection, making it safe from reverse voltage damage, and it can be soldered or plated to the circuit board.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ELJ-FCR22MF | Panasonic El... | 0.07 $ | 6000 | FIXED IND 220NH 190MA 700... |
ELJ-FCR27KF | Panasonic El... | 0.07 $ | 6000 | FIXED IND 270NH 180MA 750... |
ELJ-FCR27MF | Panasonic El... | 0.07 $ | 2000 | FIXED IND 270NH 180MA 750... |
ELJ-FCR22KF | Panasonic El... | 0.07 $ | 2000 | FIXED IND 220NH 190MA 700... |
FCR2WSJR-52-1K5 | Yageo | 0.02 $ | 1000 | RES 2W 5% AXIAL1.5 kOhms ... |
FCR200JR-73-1K6 | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL1.6 kOhms ... |
FCR200JR-73-5K1 | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL5.1 kOhms ... |
FCR24.0M6T | TDK Corporat... | 0.17 $ | 3000 | CER RES 24.0000MHZ T/H24M... |
FCR25.0M6T | TDK Corporat... | 0.0 $ | 1000 | CER RES 25.0000MHZ T/H25M... |
FCR24.0M2GT | TDK Corporat... | 0.0 $ | 1000 | CER RES 24.0000MHZ T/H24M... |
FCR24.0M2G | TDK Corporat... | 0.0 $ | 1000 | CER RES 24.0000MHZ T/H24M... |
FCR200JR-73-1K8 | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL1.8 kOhms ... |
FCR200JR-73-1M | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL1 MOhms 5%... |
FCR200JR-73-200K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL200 kOhms ... |
FCR200JR-73-200R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL200 Ohms 5... |
FCR200JR-73-20K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL20 kOhms 5... |
FCR200JR-73-20R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL20 Ohms 5%... |
FCR200JR-73-220K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL220 kOhms ... |
FCR200JR-73-220R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL220 Ohms 5... |
FCR200JR-73-22K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL22 kOhms 5... |
FCR200JR-73-22R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL22 Ohms 5%... |
FCR200JR-73-240K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL240 kOhms ... |
FCR200JR-73-240R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL240 Ohms 5... |
FCR200JR-73-24K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL24 kOhms 5... |
FCR200JR-73-24R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL24 Ohms 5%... |
FCR200JR-73-270K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL270 kOhms ... |
FCR200JR-73-270R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL270 Ohms 5... |
FCR200JR-73-27K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL27 kOhms 5... |
FCR200JR-73-27R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL27 Ohms 5%... |
FCR200JR-73-2K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL2 kOhms 5%... |
FCR200JR-73-2K2 | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL2.2 kOhms ... |
FCR200JR-73-2K4 | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL2.4 kOhms ... |
FCR200JR-73-2K7 | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL2.7 kOhms ... |
FCR200JR-73-300K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL300 kOhms ... |
FCR200JR-73-300R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL300 Ohms 5... |
FCR200JR-73-30K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL30 kOhms 5... |
FCR200JR-73-30R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL30 Ohms 5%... |
FCR200JR-73-330K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL330 kOhms ... |
FCR200JR-73-330R | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL330 Ohms 5... |
FCR200JR-73-33K | Yageo | 0.03 $ | 1000 | RES 2W 5% AXIAL33 kOhms 5... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...