FCR200JR-73-36R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as the FCR200JR-73-36R, are usually found in all types of electronic applications. They are used for a variety of purposes, but most of the time they are used to control the flow of electric current. The resistor has two basic components: a body and a resistor element. The resistor element has wire ends that are connected to an electrical circuit.

FCR200JR-73-36R is a type of three-terminal resistors that combines a through-hole resistor package with a three-terminal current sensing mechanism. The body of the resistor is made of non-conductive material and typically consists of a polyester or ceramic substrate on which a resistive element is printed. The resistor has three terminals: one for input current, one for output voltage, and one for the sense current. The resistive element is printed on one side of the body, while the other side is coated with an insulating layer.

When used in an electronic circuit, the resistor functions as a current-sensing device. The input current that is fed into the resistor is converted into a voltage output by drawing a small amount of current through the resistor element. This voltage is then sent to the output terminal, where it is amplified and used to regulate the current in the electronic circuit. The sense current is used to measure the output current of the resistor, allowing a feedback loop to ensure the desired current is maintained.

The FCR200JR-73-36R is commonly used in power supply applications, particularly in rectifier circuits. In this application, the resistors are used to sense and limit the amount of current that is drawn through the circuit and protect the components from over current conditions. They are also used in amplifier circuits to sense and control the current gain and reduce noise. In audio applications, the resistors are used to limit the amount of current that is sent to the speaker, preventing damage to the sensitive components.

In medical device applications, the FCR200JR-73-36R is used as a current sensing element to detect and control the current output of medical instruments, such as MRI or ECG equipment. Additionally, the resistor can be used to regulate the current in patient monitoring systems and help maintain the desired current levels.

The FCR200JR-73-36R is a reliable and low-cost through-hole resistor that is well-suited for a variety of electronic applications. Its three-terminal current sensing mechanism can be used to accurately limit current and protect sensitive components, making it a versatile and valuable component for a wide range of electronics projects.

The specific data is subject to PDF, and the above content is for reference