FCR200JR-73-680R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used in a variety of applications. The FCR200JR-73-680R is one such resistor that is widely used in a number of different applications. It is a through-hole resistor, which means that it must be mounted on a printed circuit board, or a packaged assembly, in order to be used.

This resistor is a non-inductive, high power density, high voltage resistor, manufactured using a ceramic core and heat resistant layer with an applied electrical insulation layer. The resistor is composed of two metal layers, one on each side of the ceramic core. The first layer is formed from chromium, nickel, and molybdenum and is also referred to as a "terminal plate". The second metal layer is formed from copper and forms the electrical connection between the two sides of the resistor.

The applications of FCR200JR-73-680R resistors are varied and many. The resistor is often used in low voltage, high current applications, particularly in motor controllers and even amplifiers. In motor controllers, the resistor helps to provide adequate current to the motor and limit voltage. In amplifiers, the resistor helps to achieve greater gain levels and reduce distortion of the amplifier output. Additionally, the FCR200JR-73-680R resistor has been used in applications involving power driven lighting and arc welding.

In addition to the application of FCR200JR-73-680R resistors, there is also a scientific aspect to the resistor. The scientific basis of the FCR200JR-73-680R resistor is Ohm’s Law, which states that the voltage across a resistor is proportional to the current running through the resistor. Therefore, when the current goes through the resistor, the voltage drops across it, which allows the current to be limited. This allows the resistor to control the current in a given circuit and prevent any damage to the components.

All in all, the FCR200JR-73-680R resistor is a versatile resistor, capable of being used in a variety of applications. It has a wide range of uses, from motor controller and amplifier uses to arc welding, and lighting applications. The scientific basis of the resistor is Ohm’s Law, which states that the voltage across a resistor is proportional to the current running through the resistor. This allows the resistor to safely control the current in a given circuit and help prevent any damage to the components.

The specific data is subject to PDF, and the above content is for reference