FCR3WSJT-73-15K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are some of the most commonly used components in multi-layer printed circuit boards. They are used to provide insulation and power control, which help limit the exposure of sensitive electronics to high-power currents. The FCR3WSJT-73-15K Through Hole Resistor is one such component used to provide insulation protection and power control.

The FCR3WSJT-73-15K Through Hole Resistor requires a 79mm hole of 0.6mm minimum clearance, a 9mm hole, and mounting screws that are soldered to the printed circuit board. The FCR3WSJT-73-15K Through Hole Resistor features a power rating of 15k, and a temperature coefficient of -150ppm/°C. This means that this resistor can handle up to 15,000 volts of power, with a maximum temperature limit of -150 parts per million per degree Celsius.

The FCR3WSJT-73-15K Through Hole Resistor has a wide range of applications, including power supplies, circuit protection, power control, and signal conditioning. It can also be used in audio and video applications as well as test and measurement equipment.

The principle of operation of the FCR3WSJT-73-15K Through Hole Resistor is very simple. It produces a voltage drop between the two terminals, due to the current flow through the resistor. This voltage drop is used to provide resistance to a certain level of current so that the circuit can be regulated. In addition, the resistor provides insulation protection for the other components due to its high insulation resistance.

The FCR3WSJT-73-15K Through Hole Resistor is designed to dissipate a maximum of 0.5 watts in air, but may be used in a higher wattage application when appropriate precautions are taken. The resistor should be used with sufficient clearance to prevent thermal runaway; an air gap of 5mm should be used, and a clearance of 5mm around the socket is sufficient for most applications. In order to protect the resistor from damage, it should be isolated from other sources of heat.

The FCR3WSJT-73-15K Through Hole Resistor is an essential component in any printed circuit board and is used in a wide range of applications. It provides insulation protection and power control to limit the exposure of sensitive electronics to high-power currents. The resistor is designed to provide a voltage drop between the two terminals, and its maximum power dissipation should be kept within the limits of the design to ensure a safe and reliable operation.

The specific data is subject to PDF, and the above content is for reference