FCR3WSJT-73-270R

Series:	FCR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	270 Ohms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Carbon Film
Features:	Flame Proof, Safety
Temperature Coefficient:	-350/ +350ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.197" Dia x 0.610" L (5.00mm x 15.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are passive electrical components that are used in a wide variety of applications and industries. These components are used to control voltage and current flow within an electrical circuit. A through hole resistor is typically a cylindrical shaped component that has two leads or pins, one at each end. The two leads connect onto a printed circuit board so that the device can be correctly placed and soldered into the circuit.The most common type of through hole resistor is the FCR3WSJT-73-270R. This type of resistor has an insulated ceramic body and a rated resistance of 270 ohms. It is a fixed resistor, meaning that its resistance remains constant, and it is typically rated to operate within a temperature range of -55 °C to 155 °C. The FCR3WSJT-73-270R is a three-watt resistor, meaning that it can dissipate three watts of power without producing too much heat.This type of resistor is used in a wide variety of applications, including automotive, industrial, and consumer electronics. It can be used as a temperature sensor, voltage regulator, current limiter, waveform generator, voltage divider, or other similar function. For instance, it can be used in power supplies to prevent overvoltage and potentially damaging current surges from occurring, or in audio applications to attenuate the signal.The working principle of a FCR3WSJT-73-270R is based on a phenomenon known as Ohm’s Law. Ohm’s Law states that the current through a conductor between two points is directly proportional to the voltage applied across the two points. The resistance of the conductor is proportional to the amount of current flowing through it. So the FCR3WSJT-73-270R resistor will restrict the amount of current that can pass through it, which is useful for controlling the current flow in a circuit.The FCR3WSJT-73-270R has a range of features and advantages. It is a cost-effective solution for controlling current and voltage in circuitry. It is also relatively easy to install and requires no manual adjustments. Additionally, it has a wide temperature range, long life, and low noise making it an ideal choice for many different applications.In conclusion, the FCR3WSJT-73-270R is a through hole resistor that can be used to control current and voltage flow in a variety of applications. It has a robust design, good temperature range, and long life, making it a reliable and cost-effective solution. The working principle behind the resistor is based on Ohm’s Law, where the current through a conductor between two points is proportional to the voltage applied across the two points, and the resistance of the conductor is proportional to the amount of current flowing through it. It is an important component in many industries, ranging from automotive to consumer electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description