FCT162652CTPVCTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FCT162652CTPVCTG4 is a three-state non-inverting hex buffer/driver used in logic applications. It is a dual-supply, high-speed buffer/driver designed to provide high current levels to drive line receivers or LED latching displays. The device operates at lower supply voltages than standard logic devices and can be used with a single supply of up to 3.6V. The device features active high outputs (OE) to enable/disable the outputs, eliminating the need for external pull-up resistors. The FCT162652CTPVCTG4 can be used in a wide range of applications, such as address drivers, line drivers, clock drivers, back plane drivers, general logic buffers, and high disturbance noise immunity circuit.

The FCT162652CTPVCTG4 is an active low output enable device. This type of device has an active low-level output enable line. When the output enable line is high, the outputs of the device are in the high impedance state. When the output enable line is pulled low, the outputs of the device are enabled, driving the active load output down to a high or low level depending upon the logic state of the input. The output enable function gives the designer the flexibility to turn off specific drivers from the device, thus reducing the amount of current driven by the device.

The FCT162652CTPVCTG4 has a number of features that make it ideal for logic applications. First, it offers a low operating voltage, which results in increased power savings for the device. Second, the device offers high noise immunity, which makes it suitable for communication and control applications, especially where broadband noise is expected. Third, the device has an output enable line that can be used to reduce power consumption by turning off the outputs of the device when they are not needed. Finally, the device has a high output drive current, which is ideal for driving line receivers or LED latching displays. This makes it a suitable choice for many logic applications.

In addition to its features, the FCT162652CTPVCTG4 has also been designed in such a way as to provide excellent performance. The device is a TTL compatible buffer/driver which makes it suitable for interfacing between two logic circuits, as well as driving a TTL-level load from a low-level logic signal. The device also offers high switching speeds, making it suitable for high-frequency logic applications. Finally, the device is pin and footprint compatible with many other logic buffers/drivers, allowing for easy and cost-effective system integration.

In conclusion, the FCT162652CTPVCTG4 is a high-performance buffer/driver that is suitable for a wide range of logic applications. The device operates at lower voltages than standard logic devices and offers high current levels to drive line receivers or LED latching displays. The device also offers excellent noise immunity, high output drive current, and excellent performance when driving TTL-level loads. In addition, the device is pin and footprint compatible with many other logic buffers/drivers, allowing for easy and cost-effective system integration. All of these features make the FCT162652CTPVCTG4 a suitable choice for many logic applications.

The specific data is subject to PDF, and the above content is for reference