FD0810003

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.051" (1.30mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	15mA
Operating Temperature:	-20°C ~ 70°C
Series:	SaRonix-eCera™ FD
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	8.192MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FD0810003 Oscillators: Application Field and Working Principle

Oscillators are electronic circuits that generate repetitive waveforms, producing a signal that switches periodically. In a basic oscillator circuit, a voltage source, gain element and feedback circuit produce an instability that generates an oscillation. This oscillation can then be filtered and conditioned to produce a waveform of interest.FD0810003 oscillators are type of oscillators that have a broad range of applications. The FD0810003 oscillator can be used in a wide variety of devices, including monitoring, control, and communication. Oscillators can also be used as triggers for synchronization in applications like pulse width modulation or for clock and time-keeping applications.FD0810003 oscillators are a type of digital oscillator that uses a digitally programmable feedback network to generate an oscillation. This network consists of a digital-to-analog converter (DAC or D/A), a digital divider, and an analog comparator. The DAC generates a voltage from a digital code, the divider divides this voltage to generate a frequency, and the comparator compares the divided voltage to the input voltage. If the divided voltage is higher than the input voltage, an output from the comparator triggers a switch in the feedback loop that changes the code driving the DAC. This change in code causes the output voltage to be different from the input voltage, allowing the oscillator to oscillate.The FD0810003 oscillator can be used in a wide variety of applications, including in pulse-width modulation for motor control and in pulse generation. These oscillators can also be used for synchronization, and for clock generators that generate timing and clock signals for digital and analog circuits. The features of the FD0810003 oscillators include a high output frequency and a wide range of frequency selections. These oscillators also have a fast lock-in/hold time, wide lock-in range, programmable control, and a high output accuracy. Additionally, FD0810003 oscillators can be used in a wide temperature range, from -20 to +100 °C.The working principle of FD0810003 oscillators is based on the closed-loop feedback control method. A digital-to-analog converter (DAC) is connected to a digital divider, and a comparator circuit connected to the output of the divider and the input of DAC compares the values of the input signals. If the divider output is lower than the DAC input, the comparator sends a reset signal, which causes the DAC output voltage to decrease. When the DAC output is lower than the input voltage, the comparator sends a set signal, which causes the DAC output voltage to increase. This switching between higher and lower voltages creates an oscillation in the output signal. The frequency of oscillation is determined by the digital code being sent to the DAC, which allows for flexible adjustments in the frequency.FD0810003 oscillators have a wide range of applications and they are robust, reliable, and easy to use. Their digital feedback network allows the oscillator to reliably generate frequencies, and their wide temperature range allows them to be used in a variety of environments. Additionally, the FD0810003 oscillators have a fast lock-in/hold time, wide lock-in range, programmable control, and a high output accuracy, making them an ideal choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description