FD5000033

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.051" (1.30mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	-20°C ~ 70°C
Series:	SaRonix-eCera™ FD
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	50MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to FD500003 Oscillators

Oscillators are electronic components that can generate an alternating current or voltage. Many devices that rely on moving electric charge use oscillators in order to create the alternating current or voltage needed for the device. The FD500003 oscillator is a monolithic chip that is used in a variety of electronic applications. This article will discuss the application field and working principle of the FD500003 oscillator.

Application Field of FD500003 Oscillators

The FD500003 oscillator is a low-cost, high-frequency monolithic oscillator. It is used in a variety of electronic applications including cellphone motherboard, Wi-Fi router, computer motherboards, medical devices, digital cameras, LCD displays, and other electronic applications. It is commonly used for its ability to generate multiple frequencies. It is capable of producing both sine and square waveforms and can be adjusted to the exact frequency needed for the application.

Working Principle of FD500003 Oscillators

The FD500003 oscillator is based on a combination of a tank circuit and a voltage-controlled oscillator (VCO) circuit. The tank circuit comprises of an inductor and capacitor connected in series, while the VCO circuit consists of a voltage-dependent device (such as a transistor), a resistor, and a capacitor. The tank circuit provides the necessary oscillation to generate the alternating waveforms. The VCO circuit is used to control the frequency of the oscillations. When a voltage is applied to the VCO circuit, it produces an output that varies in frequency based on the voltage supplied. This allows the FD500003 oscillator to produce an output waveform at the exact frequency desired.

Conclusion

The FD500003 oscillator is a widely used electronic component in a variety of applications. It is based on a combination of a tank circuit and a voltage-controlled oscillator circuit. The tank circuit provides the necessary oscillation to create the alternating current or voltage waveforms, while the VCO circuit is used to control the frequency. The FD500003 oscillator is capable of producing both sine and square waveforms and can be adjusted to the exact frequency needed for the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description