FGH80N60FD2TU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An FGH80N60FD2TU is a type of silicon-controlled rectifier, or SCR. SCRs are a type of transistor with a control gate and three terminals. Like other transistors, an SCR is a current-controlled switch, which in this case works by using a gate signal to control a current flow between the anode and cathode. The FGH80N60FD2TU is a relatively new type of SCR, known as an insulated gate bipolar transistor or IGBT, in which the gate signal is isolated from the current conducting channels and is less prone to damage due to transients. Although the IGBT is a kind of SCR, it exhibits misbehaviour similar to a MOSFET in that it has less gate current drive and is not as capable of dissipating heat as other SCRs.

In general, FGH80N60FD2TU IGBTs typically used in power electronics applications including motor control, UPS systems, soft-switching circuits, and other switching applications. They are particularly used in applications that require low to moderate voltage, such as low voltage DC motor drives and DC-to-AC inverters. One of the main benefits of using an IGBT over other switches is its ability to handle high frequencies and high switching losses. In addition, their relatively low gate drive requirements make them useful in applications such as switching welding current.

The main principle of operation of an FGH80N60FD2TU IGBT is the same as with any other type of SCR. When a positive voltage is applied to the gate, it creates a “gate current” that switches on the device, allowing a large current to flow freely between the anode and cathode. Similarly, when the voltage is removed, the gate current switches off the device and the current flow is stopped. It should be noted, however, that due to their lower gate current needs, IGBTs can be triggered on and off faster than normal SCRs, allowing for faster switching applications.

The FGH80N60FD2TU IGBT also offers a number of other advantages over a normal SCR. These include their ability to handle higher power than a normal SCR, greater efficiency, and faster switching speeds. Additionally, the IGBT often has higher levels of noise immunity, allowing it to be used in different environments.

In summary, the FGH80N60FD2TU IGBT is a type of switched device that can be used in various power electronics applications, such as motor control and UPS systems. It is a relatively new type of SCR, offering increased efficiency, higher power ratings, faster switching times, and greater noise immunity than a normal SCR. Ultimately, the FGH80N60FD2TU can be a good choice for switching applications that require improved performance, efficiency, and reliability.

The specific data is subject to PDF, and the above content is for reference