FH39-51S-0.3SHW(10)

Series:	FH39
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Flat Flex Type:	FPC
Mounting Type:	Surface Mount, Right Angle
Connector/Contact Type:	Contacts, Top and Bottom
Number of Positions:	51
Pitch:	0.012" (0.30mm)
Termination:	Solder
FFC, FCB Thickness:	0.20mm
Height Above Board:	0.044" (1.12mm)
Locking Feature:	Flip Lock, Backlock
Cable End Type:	Tapered
Contact Material:	Phosphor Bronze
Contact Finish:	Gold
Housing Material:	Liquid Crystal Polymer (LCP)
Actuator Material:	Polyamide (PA), Nylon
Features:	Zero Insertion Force (ZIF)
Voltage Rating:	30V
Operating Temperature:	-55°C ~ 85°C
Material Flammability Rating:	UL94 V-0
Current Rating:	0.2A
Contact Finish Thickness:	19.7µin (0.50µm)
Housing Color:	Beige
Actuator Color:	Black
Mating Cycles:	10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Flat flexible connectors, which are also known as FFCs, FPCs, or FFC/FPC connectors, are widely used in many electronic devices, including laptops, tablets, and other mobile devices. They are made of flat ribbon cables that are composed of a number of small flat conductive traces, which are protected and insulated from one another by a thin layer of plastic. They enable high connection density compared to traditional wire and are much easier to route and install than traditional connectors on printed circuit boards.

FH39-51S-0.3SHW(10) Application Field and Working Principle

FH39-51S-0.3SHW(10) belongs to FFC (flat flexible connectors). This type of connectors is commonly used in mobile electric and optical systems where space and flexibility are the major requirements. It applies to direct board-to-board, vertical or right angle, system connection and are highly reliable and cost-effective. The working principle of the FH39-51S-0.3SHW(10) is simple yet efficient. The FH39-51S-0.3SHW(10) has a flat conductive ribbon cable that has a number of tiny flat conductive traces that are insulated and protected by a very thin layer of plastic material. The traces are connected to two parallel boards that both possess a series of contact pads. When the two boards are connected, the contact pads on each board create electrical contact with the conductive traces on the ribbon cable, allowing for data transmission between the two boards. The contacts are extremely reliable due to their low contact resistance values and the fact that the boards do not move relative to each other, thus maintaining a secure and stable connection between the two boards.

Advantages of FH39-51S-0.3SHW(10) FFC Connectors

FH39-51S-0.3SHW(10) connectors offer many benefits over traditional wire and connectors. It allows for much higher connection density than with traditional connectors, and its flat ribbon cable is easier and more cost-effective to route and install than traditional connectors on printed circuit boards. It also provides superior signal integrity and accuracy compared to traditional wire and connector technologies, as its flat ribbon cable has much lower resistance values and can be tightly controlled for exact specifications. Further, since the cables are completely flat and flexible, they are much easier to work with than traditional round or flat-cable connectors. The flat ribbon cable also provides much better heat and voltage resistance than traditional round and flat-cable connectors. Finally, FH39-51S-0.3SHW(10) connectors are much more reliable than traditional wire and connectors, due to their low contact resistance values and the fact that the boards do not move relative to each other, thus maintaining a secure and stable connection between the two boards.

Conclusion

FH39-51S-0.3SHW(10) flat flexible connectors are highly reliable, easy to use, and cost effective. They provide superior signal integrity and accuracy compared to traditional wire and connector technologies, as well as much better heat and voltage resistance. Finally, they offer much higher connection density than traditional connectors, and their flat ribbon cables are much easier and more cost effective to route and install than traditional connectors on printed circuit boards.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description