Allicdata Part #: | FK0500002-ND |
Manufacturer Part#: |
FK0500002 |
Price: | $ 3.31 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Diodes Incorporated |
Short Description: | OSCILLATOR XO 5.000MHZ CMOS SMD |
More Detail: | 5MHz XO (Standard) CMOS Oscillator 3.3V Enable/Dis... |
DataSheet: | FK0500002 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 2.97675 |
Series: | SaRonix-eCera™ FK |
Packaging: | Bulk |
Part Status: | Active |
Base Resonator: | Crystal |
Type: | XO (Standard) |
Frequency: | 5MHz |
Function: | Enable/Disable |
Output: | CMOS |
Voltage - Supply: | 3.3V |
Frequency Stability: | ±50ppm |
Operating Temperature: | -40°C ~ 85°C |
Current - Supply (Max): | 10mA |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.045" (1.15mm) |
Current - Supply (Disable) (Max): | 10µA |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are components of electronic circuits that generate periodic, steady-state waveforms. Every oscillator has a frequency or resonant frequency that is determined by the components utilized and how they are put together. A particular application of an oscillator is within the FK0500002.
The FK0500002 is a CMOS oscillator and has been designed for systems that use low voltage and low power. It is automated and attempts to mimic quasi-sine waves. Additionally, this piece of electronic equipment works without an external resistor and setup requirements are minimal. It is red in color and tiny in size, at just 2.0mm x 1.6mm.
The field of application of this oscillator is wide. Being a low voltage, low power CMOS oscillator, it is perfect for meetings the requirement of many of the modern low power applications. In this way, it is well-suited for portable devices, such as communications devices, wearable technology, camera systems, and other portable electronics. It also applies to the automotive field and robotics industry.
Knowing that the FK0500002 oscillator was created for low voltage and low power systems, it stands to reason that its working principle is based on this goal. It works off of a single voltage that is as low as 1.5V. This voltage can come from a VDD pin if available. It then uses this voltage to regulate a fully integrated oscillator circuit.
Within the FK0500002 oscillator is a phase-frequency detector along with PLL (Phase-Locked Loop) circuit. This combination helps to improve the accuracy of the frequency, since it is driven by the integrated PLL circuit. This PLL circuit is triggered by a reference frequency, taken from the crystal. As the voltage triggers the circuit, a quasi-sine wave is produced.
FK0500002 is an incredibly helpful device, since it requires very little setup and runs very efficiently. It has been designed to be mobile and operate on as little power as possible. This is accomplished through the use of the integrated PLL circuit which is triggered by a reference frequency from the crystal. This allows a quasi-sine wave to be produced and helps to ensure maximum accuracy and low power usage. As a result, the FK0500002 is the perfect choice for low power applications, particularly those located in portable technologies and the automotive industry.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...