FK1200013

Series:	SaRonix-eCera™ FK
Packaging:	Bulk
Part Status:	Active
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	12MHz
Function:	Enable/Disable
Output:	CMOS
Voltage - Supply:	3.3V
Frequency Stability:	±25ppm
Operating Temperature:	-20°C ~ 70°C
Current - Supply (Max):	10mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.045" (1.15mm)
Current - Supply (Disable) (Max):	10µA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OscillatorsOscillators are electrical or electronic circuits used to generate a periodic, oscillating signal. These signals are usually sine waves, though square, triangle, and sawtooth waves are possible as well. Oscillators are often used to control signals in radios, televisions, and other communications equipment. One of the most common types of oscillator is the FK 1200013 oscillator, which is widely used in the electronics industry. The FK 1200013 oscillator is an analog Sinusoidal Oscillator Circuit. It is a two-stage, IC-based oscillator, with a built-in gate for self-shutdown. It has a frequency range from 100 Hz to 200 KHz and can be configured as either a single stable oscillator or as a pair of oscillators with complementary outputs.The FK 1200013 oscillator is designed to generate an AC signal with a range of frequency settings from 100 Hz to 200 KHz. As an oscillator, it is used in a variety of applications, such as signal frequency generation, radio modulation and demodulation, audio and voice frequency synthesis, and environmental monitoring. It can also be used as a sound detector or as an automatic frequency control (AFC) circuit.In its simplest form, the FK 1200013 oscillator consists of two stages: the RC time constant generator and the oscillator stage. The RC time constant generator provides the reference voltage for the oscillator stage and is responsible for controlling the frequency of the oscillator. The oscillator stage generates the actual sinusoidal waveform which is output from the circuit. The FK 1200013 oscillator works by combining two RC time constants, one for the reference voltage and one for the oscillator stage. The reference voltage is created by a voltage divider circuit and is adjusted by the operator for a desired frequency. When the reference voltage is applied to the oscillator stage, a negative Feedback loop is established. This negative Feedback loop consists of two operational amplifiers connected in an "inverting" configuration. The result is an unstable amplifier circuit, or "relaxation oscillator". When the output of the amplifier goes above the reference voltage, it is "clipped" by a voltage regulator, creating a sawtooth waveform which is then fed back to the input of the amplifier. This Feedback loop causes the output of the amplifier to continually oscillate above and below the reference voltage. By adjusting the value of the two RC time constants, the frequency of the oscillation can be adjusted to any value within the range of the circuit. The FK 1200013 oscillator offers a number of features such as the ability to produce precise frequency output, low distortion and noise, and high accuracy. It is relatively inexpensive and easy to use, and is highly durable and reliable. Additionally, it consumes low power, which makes it ideal for low-power applications. Overall, the FK 1200013 oscillator is an extremely versatile device that can be used in a wide variety of applications. It is reliable and cost-effective, and offers a number of benefits which make it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description