Allicdata Part #: | FK2600016-ND |
Manufacturer Part#: |
FK2600016 |
Price: | $ 3.31 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Diodes Incorporated |
Short Description: | OSCILLATOR XO 26.000MHZ CMOS SMD |
More Detail: | 26MHz XO (Standard) CMOS Oscillator 3.3V Enable/Di... |
DataSheet: | FK2600016 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 2.97675 |
Series: | SaRonix-eCera™ FK |
Packaging: | Bulk |
Part Status: | Active |
Base Resonator: | Crystal |
Type: | XO (Standard) |
Frequency: | 26MHz |
Function: | Enable/Disable |
Output: | CMOS |
Voltage - Supply: | 3.3V |
Frequency Stability: | ±50ppm |
Operating Temperature: | -20°C ~ 70°C |
Current - Supply (Max): | 10mA |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.045" (1.15mm) |
Current - Supply (Disable) (Max): | 10µA |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators
Oscillators are electronic circuits that can generate repetitive and periodic electrical signals. They are commonly used in communication systems, and can also be used for frequency measurement. The oscillator circuit is the most common type of active filter, as it can be used to produce a sinusoidal output or as an electronic amplifier.
FK2600016 oscillator is a widely used, cost-effective and reliable active oscillator circuit. It is essentially a one-transistor amplifier with positive feedback. TheFk2600016 oscillator has a wide range of applications, including the generation of sinusoidal or logic waveforms, signal amplification, and communication. It can be used in radio communication systems, cell phone networks, and in other applications that require low noise and high-precision oscillators.
Working Principle
The FK2600016 oscillator works on the principle of negative feedback. The input signal is fed to the amplifier, which amplifies the signal. The output of the amplifier is then fed back to the input through a resistor and capacitor. This continuous loop of signals is then amplified repeatedly, and the output is a sinusoidal waveform.
The amplitude of the output waveform is determined by the feedback resistor. The frequency of the output waveform can be adjusted by varying the value of the feedback capacitor. By careful selection of the components, the oscillator can be made to operate at frequencies ranging from kHz to GHz.
FK2600016 oscillators are preferred for applications requiring low noise and low power consumption. The circuit is simple to design and requires only a few components. The oscillator is highly reliable and accurate, due to its low thermal drift and the high gain of the amplifier.
Applications
FK2600016 oscillators can be used in a variety of applications, including:
- Radio communication systems
- Cell phone networks
- Signal amplification
- High precision frequency measurement
- Time base generation
- Servo systems
- Temperature monitoring
- Electronic counter circuits
FK2600016 oscillators can be used to generate high precision sinusoidal signals with low power consumption. The oscillator can be used in a wide range of applications, from communications to medical equipment. The circuit is also suitable for low-noise applications, such as frequency measurement.
FK2600016 oscillators are widely used in communication systems, as they provide a reliable and cost-effective way to generate sinusoidal signals. The circuit can also be used for signal amplification and high-precision frequency measurement. With the low power consumption and low noise levels, the oscillator is highly reliable and accurate. Additionally, the circuit requires only a few components, making it easy to design and build.
In conclusion, the FK2600016 oscillator is a reliable, cost-effective, and accurate active oscillator circuit. The circuit is highly suited for applications that require low noise and low power consumption, such as communications systems and frequency measurements. The oscillator is simple to design and only requires a few components, making it a versatile and popular choice for many applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FK26L | TPI (Test Pr... | 69.27 $ | 1000 | IMMERSION/PENETRATION PRO... |
FK2600031 | Diodes Incor... | 3.76 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600029 | Diodes Incor... | 3.76 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600018 | Diodes Incor... | 3.76 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK26M | TPI (Test Pr... | 10.37 $ | 78 | PETES PLUG PROBE |
FK2600028 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600027 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600024 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600020 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600019 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600017 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
FK2600016 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 26.000MHZ C... |
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...