FM0207FTE52-12R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are devices that provide electrical resistance. The resistor FM0207FTE52-12R is a type of through hole resistor, which operate using the principle of a voltage divider circuit. This type of resistor is commonly used in current-sensing or temperature-sensing applications.

FM0207FTE52-12R consists of two resistors, R1 and R2, connected in series to form a voltage divider circuit. In this circuit, the voltage at the point where the two resistors meet is determined by the ratio of the resistances. If the two resistors have equal resistances, then the voltage at the point of meeting will be half the applied voltage. If, however, the resistance of R2 is greater than that of R1, then the voltage at the point where the two resistors meet will be lower than half the applied voltage.

This type of resistor is used in a variety of applications. For example, it is used in automobile alternators, where it is used to control the charge rate on the battery. It can also be used in amplifier circuits, where it can be used to control the amount of current delivered to the amplifying device. Additionally, it can be used in temperature-sensing applications, where it is used to measure the temperature of an object or surface.

The general working principle of the FM0207FTE52-12R through hole resistor is that when an external voltage is applied across its terminals, a current flows through the resistor’s two resistors. The resistance of the two resistors determines the amount of voltage that is dropped across them, which in turn determines the amount of current flowing through the device. The device also absorbs some heat energy when it is operating at a high frequency, allowing it to be used in temperature sensing applications.

The FM0207FTE52-12R through hole resistor is available in a variety of sizes and is relatively easy to install. Its design makes it simple to adjust the resistance by adding or removing resistors in the circuit. It is also designed to withstand high temperatures and provide reliable performance, making it ideal for temperature-sensing applications.

In summary, the FM0207FTE52-12R through hole resistor is a type of resistor that is designed with two resistors in series that operate using the principles of a voltage divider circuit. It is used for a variety of applications including alternator controlling, amplifier circuits, current-sensing and temperature-sensing. It is relatively easy to install and can be adjusted by adding or removing resistors. Finally, it can withstand high temperatures and provide reliable performance for temperature-sensing applications.

The specific data is subject to PDF, and the above content is for reference