FM0207FTE52-24K

Series:	FM0
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	24 kOhms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Metal Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are an important component of electronic circuits. They are used to control the current flow in a circuit, providing a desired resistance. They can also be used to reduce voltage or set voltage levels in a circuit. One such through hole resistor is the FM0207FTE52-24K, which is a radial-shaped resistor with a 24k ohm resistance rating. This resistor is made of carbon, and is enclosed in an insulated casing which makes it fairly tolerant to environmental conditions such as air flux and humidity. The primary application of the FM0207FTE52-24K is for voltage regulation. It can be used in a circuit to regulate the amount of voltage that is applied to a component, such as a LED or a transistor. This resistor is also often used in filter circuits and crossover networks, where it helps to reduce signals between different components. When a voltage is applied to the FM0207FTE52-24K, it works by acting as a resistor to reduce the current flow through the circuit. The current flow is dependent on the voltage that is applied, as well as on the resistance that the resistor provides. As the voltage increases, the current being applied to the circuit is also increased. If the voltage is too high, the current can exceed the rated limit of the FM0207FTE52-24K, leading to circuit failure. This is why it is important to make sure that the voltage applied to the resistor does not exceed the maximum rated voltage of the resistor. The working principle of the FM0207FTE52-24K is relatively simple. It consists of a carbon disc encapsulated in an insulated casing. When a voltage is applied to the resistor, electricity flows through the carbon disc which acts as a resistor to reduce the current flow. The resistance of the resistor depends on the size of the carbon disc, as well as on the amount of insulation around it. The greater the size of the carbon disc, the lower the resistance of the resistor. In summary, the FM0207FTE52-24K is a through hole resistor that is primarily used for voltage regulation. It is made of carbon and is enclosed in an insulated casing, and works by acting as a resistor to reduce the current flow in a circuit when a voltage is applied. These resistors are often used in applications where the voltage needs to be regulated, such as in filter circuits or crossover networks.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description