FM4MFA1012MPMDA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FM4MFA1012MPMDA is a multifunctional antenna array designed for wideband signal detection and processing applications. It combines a multi-element array, high-dynamic-range active signal processing, and digital beamforming to provide extremely high system performance. The application field primarily includes point to point communications, high-resolution radar imaging, and applicabilities to spectrum sensing and direction of arrival (ToA) Wideband Modem applications.

The working principle of the FM4MFA1012MPMDA involves the input of raw signals through a low noise amplifier (LNA) followed by an analog preprocessing stage. The analog preprocessing stage uses a wideband bank of RF filters, splitters, and phase shifters to perform several simultaneous analog operations. The output signals are routed to high dynamic-range analog-to-digital converters followed by a high-performance digital beam-forming. Finally, the digital beam-forming output signals are delivered in either analog or digital format.

The first stage of the analog preprocessing, the wideband bank of RF Filters, provides a high dynamic range to the signal inputs. This is achieved by blocking interferences such as interference signals, thermal noise, out-of-band signals, and other unwanted signals. The wideband filter bank also ensures an optimal level of signal separation and isolation, so that the interfering signals can be reduced and the desired signals can be detected more clearly.

The second stage of the analog preprocessing consists of a splitters and phase shifters. This allows the signals to be broken down into manageable pieces and the inherent phasing effects can be corrected. The phase shift also compensates for any temporal or frequency drift, and the signal strength can be adjusted for optimized performance.

The digital beam-forming signal processing stage rolls up several techniques to ensure an optimal signal output. It includes time-delay beamforming, frequency-difference beamforming, array response reconstructing, beam-steering, and beamformer inversion. The ultimate goal of the digital beam-forming stage is to maximize the signal-to-noise ratio, reduce noise interference, and provide a wide-area field-of-view. The digital beam-forming process is usually done in the time and frequency domain and requires very sophisticated signal and image processing algorithms.

In summary, FM4MFA1012MPMDA is a multi-functional antenna array system designed for wideband signal detection and digital processing applications. It combines a multi-element array, high dynamic-range active signal processing, and digital beam-forming to provide extremely high system performance. The wideband bank of filters ensures a high degree of signal separation and isolation and the splitter and phase shifter stages enable critical signal phasing corrections. Finally, the digital beam-forming stage optimizes the signal-to-noise ratio for a more reliable and efficient system. FM4MFA1012MPMDA can be used for a variety of applications, including point to point communications, high-resolution radar imaging, spectrum sensing, and direction of arrival (ToA) wideband modem applications.

The specific data is subject to PDF, and the above content is for reference