FMAC-091D-5010

Series:	FMAC ECO
Part Status:	Active
Filter Type:	Three Phase (Delta)
Configuration:	Single Stage
Voltage - Rated DC:	--
Voltage - Rated AC:	480V
Current:	50A
Frequency - Operating:	50/60Hz
Applications:	Inverters, Power Drive Systems
Approvals:	cURus, ENEC, VDE
Operating Temperature:	-25°C ~ 100°C
Mounting Type:	Chassis Mount
Termination Style:	Terminal Block
Inductance:	650µH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules

The FMAC-091D-5010 is a type of power line filter module which is routinely used in industrial applications. It is designed to regulate the amount of current passing through it, thus protecting downstream electronics from noise or other interference. The module utilizes capacitive and inductive components to analyze and filter the incoming power waveform.Components of the FMAC-091D-5010The module consists of a capacitor, two inductors, and two capacitors. The capacitor is an electrolytic type with a voltage rating between 50V to 400V. The inductors are rated between 0.1µH to 1µH. The two capacitors are rated at 47µF and rated at 25V.Application field of the FMAC-091D-5010The FMAC-091D-5010 is used in a wide range of industrial applications, such as motor control, lighting, power generation, and protection electronics. It is typically used in situations where a high-frequency electrical noise must be filtered out before feeding into downstream devices, such as a PLC or a motor controller.Working Principle of the FMAC-091D-5010The FMAC-091D-5010 works by analyzing and filtering the power waveform. The capacitors act as a noise blocker, allowing only the desired frequencies to pass through while blocking out any unwanted noise which may be present. The inductors work to further analyze the waveform, boosting the desired frequencies and filtering out the unwanted frequencies. The module then acts as a power regulator, controlling the amount of current passing through it.ConclusionThe FMAC-091D-5010 is a power line filter module which is used to regulate the amount of current passing through it. Its components allow it to analyze and filter the incoming power waveform, blocking out any unwanted noise or interference. This makes the FMAC-091D-5010 an ideal choice for industrial applications, such as motor control, lighting, power generation, and protective electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description