FMF200FRE73-1K5

Through Hole Resistors are a simple component used in many electrical and electronic devices. In many cases, they are a very cost-effective solution for providing a fixed resistance to a circuit. The FMF200FRE73-1K5 is a resistive component that falls under this category. In this article, we will discuss the application fields and working principle of the FMF200FRE73-1K5.

What is the FMF200FRE73-1K5?

The FMF200FRE73-1K5 is a resistive component that is used in electronic devices. It is an axial leaded (through hole) resistor, meaning that it is designed to be used with a printed circuit board. The FMF200FRE73-1K5 features a wide range of values, including 1K5, 2K2, 3K3, and 10K.

Application Fields

The FMF200FRE73-1K5 can have many applications in electronic systems. It can be used to create any resistance value, ranging from low to high, making it extremely versatile. Some of the different application fields of the FMF200FRE73-1K5 include:

• Power Supply Regulation: The FMF200FRE73-1K5 is commonly used in power supplies to regulate the output voltage.
• Motor Speed Control: The FMF200FRE73-1K5 is used to control the speed of an electric motor.
• Voltage Dividers: The FMF200FRE73-1K5 can be used to divide a voltage into two or more parts.
• Filters: The FMF200FRE73-1K5 can be used to filter out different frequency components in an electronic system.
• Noise Reduction: The FMF200FRE73-1K5 can be used to reduce the level of noise in an electronic system.

Working Principle of FMF200FRE73-1K5

The FMF200FRE73-1K5 works in a simple way. When a voltage is applied across the device, the resistor will reduce the voltage relative to the amount of resistance it has. This is known as Ohm’s Law. The point where the voltage is reduced is known as the output voltage, and it is usually different from the input voltage. The ratio of the input voltage to the output voltage is known as the Voltage Divider Ratio (VDR).

The amount of resistance is determined by the resistor’s value. The FMF200FRE73-1K5 has a value of 1K5, which means it has a resistance of 1.5k Ohms. This is an important factor to consider when designing a circuit. The resistor’s value should be chosen carefully, so that it does not provide too much or too little resistance to the circuit.

Conclusion

The FMF200FRE73-1K5 is a versatile resistive component, capable of providing a wide range of resistances. It can be used in many different applications, including power supply regulation, motor speed control, voltage dividers, filters, and noise reduction. The working principle of the FMF200FRE73-1K5 is simple: it reduces the voltage based on its resistance value. Care must be taken when selecting the correct value for the resistor to ensure that the desired results are achieved.