FN0600010

Series:	SaRonix-eCera™ FN
Packaging:	Bulk
Part Status:	Active
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	6MHz
Function:	Enable/Disable
Output:	CMOS
Voltage - Supply:	3.3V
Frequency Stability:	±50ppm
Operating Temperature:	-40°C ~ 85°C
Current - Supply (Max):	15mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max):	0.071" (1.80mm)
Current - Supply (Disable) (Max):	10µA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FN0600010 oscillator

An FN0600010 oscillator is a type of electronics device used to generate a periodic signal, typically alternating electrical current or voltage. It is widely used for a variety of purposes, including frequency synthesis and timing. It is also often used to drive memories and logic devices, producing pulses that can be used to transmit or store data. The FN0600010 oscillator is an electronic component designed to produce an alternating output waveform with a frequency that is adjustable within certain limits, typically between 50 and 2500 Hz. The component consists of two parts: an input resistor, and an output capacitor. The resistor and capacitor are connected in series and driven by a voltage input. The output voltage is produced when the input voltage is applied.The FN0600010 oscillator operates on the principle of alternating current. When a voltage is applied to the input resistor, it acts as a resistance, allowing only a certain amount of current to flow through the circuit. The capacitor then acts like a storage device, storing and releasing the current. The alternating current is produced when the capacitor charges and discharges, producing an output voltage which alternates. The frequency of the output is determined by the ratio of the capacitor and resistor values.The FN0600010 oscillator has a wide range of applications. It is commonly used in telecommunications, television, radio, and audio electronics, as well as in automotive, industrial, and scientific applications. In telecommunications, it is used to generate a signal to control the timing of transmission. In radio and television, it is often used to generate periodic time signals used to synchronize incoming broadcasts. In audio electronics, it is used to produce the range of frequencies needed to accurately reproduce sound. In automotive and industrial applications, it is used to generate a signal to control the operation of motors. In scientific applications, it is used to generate a precise frequency signal for instrumentation and calibration.FN0600010 oscillators typically require an external power source, such as a battery or a DC voltage source, and may also require additional components such as a transformer or an amplifier to generate the required output frequency. The oscillator can be adjusted by changing the capacitor and resistor values, or by adding additional components such as a transformer or an amplifier. The accuracy of the output frequency is determined by the quality of the components used and by the stability of the input voltage.The FN0600010 oscillator is a reliable and versatile electronic component that can be used for a wide range of applications. It is easy to configure, and can operate over a wide range of frequencies. It is reliable and simple to maintain, making it ideal for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description