FN258HV-100-35

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules, such as the FN258HV-100-35, provide filtering of power line noises, acoustic noises, and parasitic effects which may be found in many electrically noisy circuits and applications. These filters are designed to smoothly and safely route power from the source to the load while attenuating high-frequency signal noise. The broad scope of their functionality makes these devices invaluable in a variety of commercial and industrial settings where noise pollution, or parasitic reactions, must be controlled to ensure safe and reliable operation.

The FN258HV-100-35 is an example of a single-stage filter, featuring an in/out high-voltage connection capable of handling up to 460 VAC, and a pair of short-circuit-protected coaxial connectors for signal filtering. This type of power line filter consists of two input power leads, one for the power line and the other for the input signal, and two output power leads, which are both electrically and mechanically isolated from each other. The filter is designed to limit the maximum power breakdown voltage, and to provide signal filtering and noise suppression from the power line.

This type of filter is actually very simple in design. It consists of two capacitors connected in series with each other, one connected across the input power line and the other connected across the output power line. The two capacitors form what is known as a high-pass filter, which is designed to attenuate damaging high-frequency noise signals which would otherwise be allowed to pass through the filter. These high-frequency signals are then filtered out and dissipated through the filter’s components, fully protecting the load.

This type of power line filter can be used in many different applications and industries. For example, it can be used in the medical industry to protect patient equipment or devices from high-frequency interference, or in the automotive industry to reduce the impact of engine noise on sensitive control systems. It is also commonly used in telecom and data communication systems, to protect sensitive data from high-frequency interference and to provide a clean and reliable power source for the system.

In addition to its signal filtering capabilities, the FN258HV-100-35 also provides a number of other important features. It features two short-circuit-protected coaxial connectors which can be used to provide signal filtering from the power line, and it also has a built-in RF choke which acts to attenuate radio frequency signals in order to further reduce interference. The filter is also equipped with a high-voltage terminal block which can be used to protect the filter against high-voltage spikes and surges.

The FN258HV-100-35 is an invaluable component in a wide variety of applications, providing reliable power filtering and noise suppression. Through the use of its two capacitors and RF choke, the filter can provide excellent signal filtering and a clean power source for the system, as well as protection against high-voltage spikes and surges. The filter has proven its effectiveness in a multitude of different commercial and industrial settings, and its ease of setup and installation make it a valuable tool in both new and existing systems.

The specific data is subject to PDF, and the above content is for reference